Airbrakes-SR
burnoutlabs·airbrakes-SR·electrical/dmats_hw_v2_0/dmats_hw_v2_0.kicad_pcb
About the Airbrakes-SR PCB
Airbrakes-SR is an open source AVR/Arduino PCB design by burnoutlabs, published on GitHub. It is a 2-layer board measuring 132.7 × 132.7 mm, with 37 components from 20 distinct parts.
Its main chip is the ARDUINO_NICLA, from the AVR/Arduino family. Other key parts include the A1324 and ABX00042. By type, the board carries 8 resistors, 7 capacitors, 5 ICs, 4 transistors, 4 switches and 3 battery holders.
It belongs with the robotics & motion designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Airbrakes (DMATS) for a 10k ft sounding rocket: WE Rocketry 2023-24 capstone. Standalone copy of werocketry/airbrakes-SR. Never deployed in flight.
Schematics, PCB layout and supporting analysis for the DMATS electronics. None of this hardware flew; see docs/status.md.
KiCad backup zips (-backups/), autosaves (autosave-), caches (fp-info-cache) and per-user .kicadprl files are editor leftovers, not design files. Any such files in the project folders are slated for removal (#5); once that cleanup lands, electrical/BACKUPS.md` records what they held.
Main components on the Airbrakes-SR
Airbrakes-SR bill of materials (BOM)
37 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | ARDUINO_NICLA | U1 |
| 2 | A1324 | JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | U2, U3 |
| 1 | ABX00042 | MODULE_ABX00042 | U4 |
| 1 | ~ | HVQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U7 |
| 1 | Motor_2BitEncoder | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | M1 |
| 4 | PSMN1R0-30YLC,115 | LFPAK56 | Q1, Q2, Q3, Q4 |
| 3 | 3V7 LI-ION | BatteryHolder_Keystone_1042_1x18650 | BT1, BT2, BT3 |
| 2 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1, BZ2 |
| 1 | 16V 470n | C_0805_2012Metric | Cp1 |
| 1 | 16V 22u | C_0805_2012Metric | Creg1 |
| 1 | Jumper_2_Open | R_0603_1608Metric | JP1 |
| 1 | SW_SPST | SW_DIP_SPSTx01_Slide_Power | SW1 |
| 3 | SW_SPDT | CUI_SLW-913535-2A-RA-D_SPDT_Angled | SW2, SW3, SW4 |
| 2 | 10n | C_0603_1608Metric | C1, C2 |
| 1 | 10U | C_0805_2012Metric | C3 |
| 1 | 100N | C_0603_1608Metric | C4 |
| 2 | 50V 220U | CP_Elec_10x10 | C5, C7 |
| 1 | 50V 10U | C_0805_2012Metric | C9 |
| 4 | 10K | R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | 1K | R_0603_1608Metric | R8, R9, R10, R11 |
Airbrakes-SR design files
The KiCad project lives in the burnoutlabs/airbrakes-SR repository on GitHub; these links point at the commit this page was built from.
Airbrakes-SR: common questions
What microcontroller does the Airbrakes-SR use?
The Airbrakes-SR is built around the ARDUINO_NICLA, from the AVR/Arduino family.
How big is the Airbrakes-SR PCB?
The Airbrakes-SR measures 132.7 × 132.7 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the Airbrakes-SR?
37 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Airbrakes-SR design files?
From the burnoutlabs/airbrakes-SR repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Airbrakes-SR design in my own project?
The repository has no license, so all rights stay with burnoutlabs. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Airbrakes-SR without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Earlier revisions in the repo: dmats_hw_v1_0
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k