HardLabs

Byteworker

Bytewerk·byteworker-kicad

Byteworker PCB layout, top view — open source AVR/Arduino board by Bytewerk

About the Byteworker PCB

Byteworker is an open source AVR/Arduino PCB design by Bytewerk, published on GitHub under the CC-BY-SA-4.0 license. It is a board measuring 34 × 34 mm, with 61 components from 28 distinct parts.

Its main chip is the ATMEGA16M1, from the AVR/Arduino family. Other key parts include the TJA1043 and UA78M05IDCY. By type, the board carries 25 resistors, 10 capacitors, 6 diodes, 5 transistors, 3 jumpers and 3 LEDs.

From the project

Our famous byteworker now available in Kicad

Main components on the Byteworker

TJA1043UA78M05IDCY

Byteworker bill of materials (BOM)

61 components, 28 distinct parts.

QtyPartRefs
1
TJA1043
IC2
1
UA78M05IDCY
IC3
4
BSS138
Q1, Q2, Q3, Q5
1
AP2321GN-HF-3TR
Q4
1
16 MHz
X1
1
SUBD-M_H9
X2
1
AVRSPI-61.27
J2
2
—
@HOLE0, @HOLE1
2
—
JP1, JP3
1
—
JP2
1
PTR1B1,27
TP2
1
ATMEGA16M1
UC1
2
red
LED1, LED3
1
blue
LED2
2
1N5819HW
D1, D5
2
4v7
D2, D3
1
16V
D4
1
SCHOTTKY323
D6
2
18p
C1, C4
5
100n
C2, C5, C6, C7, C10
Show 8 more
QtyPartRefs
1
330n
C3
1
2u2
C8
1
n.b.[100n]
C9
12
10k
R1, R4, R8, R9, R13, R16, R17, R18 +4
6
1k
R2, R5, R7, R10, R21, R22
3
dnp
R3, R6, R11
2
18k
R12, R30
2
n.b.[62R]
R14, R15

Byteworker design files

The KiCad project lives in the Bytewerk/byteworker-kicad repository on GitHub; these links point at the commit this page was built from.

Byteworker: common questions

What microcontroller does the Byteworker use?

The Byteworker is built around the ATMEGA16M1, from the AVR/Arduino family.

How big is the Byteworker PCB?

The Byteworker measures 34 × 34 mm and is 1.6 mm thick.

How many components are on the Byteworker?

61 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the Byteworker design files?

From the Bytewerk/byteworker-kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Byteworker design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which Bytewerk chose for the repository.

Can I test firmware for the Byteworker without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards