Tresvizo panel usb

cadaritre·TresVizoRTK·hardware/panel-usb/kicad/tresvizo-panel-usb.kicad_pcb

Tresvizo panel usb PCB layout, top view — open source board by cadaritre

About the Tresvizo panel usb PCB

Tresvizo panel usb is an open source PCB design by cadaritre, published on GitHub. It is a 4-layer board measuring 20.8 × 18.9 mm, with 6 components from 5 distinct parts.

Other key parts include the USBLC6-2SC6. By type, the board carries 2 connectors, 2 resistors, 1 IC and 1 diode.

From the project

Software para ESP32 y y UM980

Lleva un receptáculo USB-C 2.0 al ras de la cara exterior de la tapa curva del panel de la carcasa V2.2 y lo une con un cable corto JST GH de 8 pines a J101 de la placa principal (carga a 5 V y USB nativo del ESP32-S3). Es una placa de 4 capas y 1.6 mm, con todas las piezas por la cara superior.

Esquema en fab/tresvizo-panel-usb-schematic.pdf y vistas en fab/tresvizo-panel-usb-top.png / fab/tresvizo-panel-usb-bottom.png. Los genera build.py, igual que el ZIP de Gerber: cambian en cada vuelta y solo se guardan en git en los hitos (git add -f).

Main components on the Tresvizo panel usb

Tresvizo panel usb bill of materials (BOM)

6 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2SC6
U501
1
TYPE-C-31-M-12
USB_C
J501
1
WAFER-GH1.25-8PWB
PANEL_USB
J502
1
SMF15A
D501
2
0402WGF5101TCE
5.1k
R501, R502

Tresvizo panel usb design files

The KiCad project lives in the cadaritre/TresVizoRTK repository on GitHub; these links point at the commit this page was built from.

Tresvizo panel usb: common questions

How big is the Tresvizo panel usb PCB?

The Tresvizo panel usb measures 20.8 × 18.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Tresvizo panel usb?

6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Tresvizo panel usb design files?

From the cadaritre/TresVizoRTK repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Tresvizo panel usb design in my own project?

The repository has no license, so all rights stay with cadaritre. Use it as a reference, and ask the author before reusing the design.

More boards in TresVizoRTK