1,777 open source boards using the USBLC6-2SC6

Real designs built with the USBLC6-2SC6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

1,777 boardsClear filters|Most starred

How designs wire the USBLC6-2SC6

Read from the KiCad layouts of 1328 open source designs, one per repository: what each pin of the USBLC6-2SC6 connects to, and the resistors, capacitors and other passives placed on it.

I/O1pin 1, 6Connected to: A connector 57%, the microcontroller 28%
  • Series resistor on 30% · 22 Ω (225), 27 Ω (165), 0 Ω (19)
GNDpin 2Connected to: GND 98%
I/O2pin 3, 4Connected to: A connector 57%, the microcontroller 28%
  • Series resistor on 30% · 22 Ω (225), 27 Ω (169), 0 Ω (21)
VBUSpin 5Connected to: VBUS 76% · a signal 22%
  • Decoupling capacitor on 37% · 100 nF (298), 10 µF (105), 1 µF (98)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pro V2 by kata0510, EinkPDA keyboard by TalismanDesign, L0 USB by Luos-io and FW-EC-DongleHiderPlus by LeoDJ.

The USBLC6-2SC6 in open source designs

The gallery holds 1777 open source boards using the USBLC6-2SC6 from 1383 GitHub repositories; a typical one measures about 78.9 × 60.5 mm and carries around 76 components.

55% use four copper layers or more, and 42% carry an open source license.

The most starred is Pro V2 by kata0510.

Microcontrollers on boards using the USBLC6-2SC6

USBLC6-2SC6: common questions

Where can I find a USBLC6-2SC6 reference design?

Each of the 1777 boards on this page is a real design using the USBLC6-2SC6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the USBLC6-2SC6?

The AMS1117-3.3, AP2112K-3.3, RP2040, AP2112K-3.3TRG1 and W25Q128JVS appear in the most repositories here.

Which microcontrollers do boards using the USBLC6-2SC6 use?

Most are built on ESP32 (561), STM32 (553), RP2040/RP2350 (223) and AVR/Arduino (82).

How big is a typical board using the USBLC6-2SC6?

The median is 78.9 × 60.5 mm, and 45% are two-layer designs.

What is the most popular open source board using the USBLC6-2SC6?

By GitHub stars, Pro V2 by kata0510, with 2,299 stars.

Can I simulate one of these boards using the USBLC6-2SC6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part