Cas pyro hw
calstar·cas-pyro-hw
About the Cas pyro hw PCB
Cas pyro hw is an open source PCB design by calstar, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 63.5 × 63.5 mm, with 69 components from 12 distinct parts.
Other key parts include the TCA9555PWR and MSOP8_MC_MCH. By type, the board carries 27 resistors, 10 connectors, 10 capacitors, 8 transistors, 8 diodes and 5 ICs.
From the project
Common Avionics Stack - Blackpowder Ignition Module - Hardware
Main components on the Cas pyro hw
Cas pyro hw bill of materials (BOM)
69 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCA9555PWR | TSSOP-24_4.4x7.8mm_P0.65mm | U1 |
| 4 | MSOP8_MC_MCH | TC4427AEUA | U2, U3, U4, U5 |
| 4 | FDS6898A | SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q3, Q5, Q7 |
| 4 | Q_DUAL_PMOS_S1G1D2S2G2D1 | SOT-363_SC-70-6_Handsoldering | Q2, Q4, Q6, Q8 |
| 1 | CAS_stacking | CAS_physical | J1 |
| 9 | Conn_01x02 | Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J2, J3, J4, J5, J6, J7, J8, J9 +1 |
| 1 | TestPoint | TestPoint_Keystone_5000-5004_Miniature | TP1 |
| 8 | D_Zener | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 6 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C6, C8, C10 |
| 4 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5, C7, C9 |
| 24 | 50k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +16 |
| 3 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25, R26, R27 |
Cas pyro hw design files
The KiCad project lives in the calstar/cas-pyro-hw repository on GitHub; these links point at the commit this page was built from.
Cas pyro hw: common questions
How big is the Cas pyro hw PCB?
The Cas pyro hw measures 63.5 × 63.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Cas pyro hw?
69 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cas pyro hw design files?
From the calstar/cas-pyro-hw repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Cas pyro hw design in my own project?
Yes, under the terms of its BSD-3-Clause license, which calstar chose for the repository.