HardLabs

Can ortholinear keyboard

canaknesil·can-ortholinear-keyboard·pcb/can-ortholinear-keyboard.kicad_pcb

Can ortholinear keyboard PCB layout, top view — open source AVR/Arduino board by canaknesil

About the Can ortholinear keyboard PCB

Can ortholinear keyboard is an open source AVR/Arduino PCB design by canaknesil, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 285.8 × 114.4 mm, with 173 components from 5 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 86 switches, 86 diodes and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

Ortholinear keyboard PCB design.

Main components on the Can ortholinear keyboard

Arduino_Nano_v3.x

Can ortholinear keyboard bill of materials (BOM)

173 components, 5 distinct parts.

QtyPartRefs
1
Arduino_Nano_v3.x
A1
80
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +72
4
SW_Push
SW30, SW41, SW74, SW78
2
SW_SPST
SW77, SW82
86
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +78

Can ortholinear keyboard design files

The KiCad project lives in the canaknesil/can-ortholinear-keyboard repository on GitHub; these links point at the commit this page was built from.

Can ortholinear keyboard: common questions

What microcontroller does the Can ortholinear keyboard use?

The Can ortholinear keyboard is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Can ortholinear keyboard PCB?

The Can ortholinear keyboard measures 285.8 × 114.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Can ortholinear keyboard?

173 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Can ortholinear keyboard design files?

From the canaknesil/can-ortholinear-keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Can ortholinear keyboard design in my own project?

Yes, under the terms of its GPL-3.0 license, which canaknesil chose for the repository.

Can I test firmware for the Can ortholinear keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards