STM32G4-tutorial project

CanSource·STM32G4-tutorial-project·hardware/stm32-tutorial-project/stm32-tutorial-project.kicad_pcb

STM32G4-tutorial project PCB layout, top view — open source STM32 board by CanSource

About the STM32G4-tutorial project PCB

STM32G4-tutorial project is an open source STM32 PCB design by CanSource, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 147.4 × 140 mm, with 57 components from 34 distinct parts.

Its main chip is the STM32G431CBT6, from the STM32 family. Other key parts include the AZ1117CH-3.3TRG1. By type, the board carries 18 resistors, 14 capacitors, 12 diodes, 2 ICs, 2 transistors and 2 connectors.

From the project

A tutorial for microcontroller hardware design with the STM32 G4 (in KiCAD)

a cool table showing the workflow of all the kicad projects. | project_name | DRC | ERC | | ------------ | --- | --- | | stm32-tutorial-project | ❌| ❌ |

This is a simple project template for new kicad projects. This template has some basic setup already completed such as workflows for auto creating all the things you forget when creating a kicad project such as:

Main components on the STM32G4-tutorial project

STM32G4-tutorial project bill of materials (BOM)

57 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G431CBT6
STM32G431CBTx
U1
1
AZ1117CH-3.3TRG1
AZ1117-3.3
U2
1
MMBT3904
NPN
Q1
1
MMBT3906
PNP
Q3
1
12.60049
Crystal_GND24
X1
1
USB4105-GF-A
USB_C_Receptacle_USB2.0_14P
J1
1
AWHW2 10G-0202
10pin IDC SWD
J2
1
0ZCK0075FF2E
Fuse
F1
1
RC0603JR-070RL
0
R_EXT1
1
PTS636SM43SMTR LFS
SW_Push
SW1
1
OS102011MA1QN1
SW_Push_SPDT
SW2
1
150060AS75000
LED
D1
4
150060BS75000
LED
D2, D5, D6, D7
2
SD0805S020S1R0
D_Schottky
D3, D4
1
150060RS75000
LED
D8
1
150060YS75000
LED
D9
1
150060VS75000
LED
D10
1
SP0504BAHTG
D11
1
PTVS7V5Z1USKYL
PTVS7V5Z1USK
D12
2
MH1608-221Y
220 OHM
FB1, FB2
Show 14 more
QtyPartRefs
1
C0603C104K9RACTU
100n
C1
2
C0603C105K9RACTU
1u
C2, C8
1
C0603C475K9PACTU
4.7u
C3
4
C0603C104K9PACTU
100n
C4, C5, C6, C11
1
C0603C103K9RACTU
10n
C7
2
C0603C120K9RAC7411
12pf
C9, C10
2
C0603C106M9PACTU
10u
C12, C13
1
C0805C226M9PACTU
22u
C14
8
RT0603BRD07500RL
500
R2, R4, R8, R9, R10, R11, R12, R15
3
RC0603FR-0710KL
10k
R3, R16, R17
1
RC0603JR-070RL
0
R5
2
RC0603FR-075K1L
5.1k
R6, R7
2
RC0603FR-0710KL
1k
R13, R14
2
RC0603FR-074K7L
4.7k
R18, R19

STM32G4-tutorial project design files

The KiCad project lives in the CanSource/STM32G4-tutorial-project repository on GitHub; these links point at the commit this page was built from.

STM32G4-tutorial project: common questions

What microcontroller does the STM32G4-tutorial project use?

The STM32G4-tutorial project is built around the STM32G431CBT6, from the STM32 family.

How big is the STM32G4-tutorial project PCB?

The STM32G4-tutorial project measures 147.4 × 140 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32G4-tutorial project?

57 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32G4-tutorial project design files?

From the CanSource/STM32G4-tutorial-project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32G4-tutorial project design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which CanSource chose for the repository.

Can I test firmware for the STM32G4-tutorial project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards