MicroSD Zelda FORO JLC FIX V2
About the MicroSD Zelda FORO JLC FIX V2 PCB
MicroSD Zelda FORO JLC FIX V2 is an open source PCB design by CapnRon, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 28.4 × 29.7 mm, with 14 components from 7 distinct parts.
By type, the board carries 2 capacitors, 1 connector and 1 resistor.
It belongs with the wearables designs in this gallery.
From the project
Castellated-edge microSD interposer for the Game & Watch: The Legend of Zelda console mod scene — original KiCad artwork, CERN-OHL-S v2
This directory preserves, unmodified, every original design file this project's attribution chain depends on -- kept here for provenance and CERN-OHL-S v2 licence compliance (Covered Source must be made available; see the repository LICENSE and NOTICE.md).
Each subdirectory contains the original archive exactly as received (.zip) plus its extracted contents (extracted/) for easier browsing and diffing.
MicroSD Zelda FORO JLC FIX V2 bill of materials (BOM)
14 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TFP09-2-12B | TFP09-2-12B | J9 |
| 1 | 1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | 1µF |
| 1 | 100k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | 100kΩ |
| 7 | PadMicro | Pad_0_3x1_2 | Pin77, Pin83, Pin88, Pin89, Pin90, Pin96, Pin99 |
| 1 | RT9193-28GB | SOT-23-5 | RT9193 |
| 2 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
MicroSD Zelda FORO JLC FIX V2 design files
The KiCad project lives in the CapnRon/gnw-zelda-microsd-kicad repository on GitHub; these links point at the commit this page was built from.
MicroSD Zelda FORO JLC FIX V2: common questions
How big is the MicroSD Zelda FORO JLC FIX V2 PCB?
The MicroSD Zelda FORO JLC FIX V2 measures 28.4 × 29.7 mm, has 2 copper layers and is 0.2024 mm thick.
How many components are on the MicroSD Zelda FORO JLC FIX V2?
14 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the MicroSD Zelda FORO JLC FIX V2 design files?
From the CapnRon/gnw-zelda-microsd-kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MicroSD Zelda FORO JLC FIX V2 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which CapnRon chose for the repository.
More boards in gnw-zelda-microsd-kicad
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k