DS4-C-HWTesting

CasualCodersProjects·DS4-C-HWTesting

DS4-C-HWTesting PCB layout, top view — open source STM32 board by CasualCodersProjects

About the DS4-C-HWTesting PCB

DS4-C-HWTesting is an open source STM32 PCB design by CasualCodersProjects, published on GitHub. It is a 4-layer board measuring 49.7 × 47.4 mm, with 19 components from 14 distinct parts.

Its main chip is the STM32F303CBTx, from the STM32 family. By type, the board carries 9 capacitors, 4 resistors, 2 connectors, 1 IC and 1 crystal.

From the project

Hardware testing our DS4 C Boards automatically!

Main components on the DS4-C-HWTesting

DS4-C-HWTesting bill of materials (BOM)

19 components, 14 distinct parts.

QtyPartRefs
1
STM32F303CBTx
U1
1
Resonator
Y1
1
011/030/040/05x
J3
1
001
J4
1
AMS1117-3.3
3v3
1
SSD1306
SSD1306
2
C
C3, C4
4
100n
C5, C6, C7, C8
1
4.7u
C9
1
10nf
C10
1
1u
C11
2
5.1k
R1, R2
1
1.5k
R3
1
10k
R4

DS4-C-HWTesting design files

The KiCad project lives in the CasualCodersProjects/DS4-C-HWTesting repository on GitHub; these links point at the commit this page was built from.

DS4-C-HWTesting: common questions

What microcontroller does the DS4-C-HWTesting use?

The DS4-C-HWTesting is built around the STM32F303CBTx, from the STM32 family.

How big is the DS4-C-HWTesting PCB?

The DS4-C-HWTesting measures 49.7 × 47.4 mm, has 4 copper layers and is 4.69 mm thick.

How many components are on the DS4-C-HWTesting?

19 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the DS4-C-HWTesting design files?

From the CasualCodersProjects/DS4-C-HWTesting repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DS4-C-HWTesting design in my own project?

The repository has no license, so all rights stay with CasualCodersProjects. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DS4-C-HWTesting without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards