14 open source boards using the STM32F303CBTx

Real designs built with the STM32F303CBTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the STM32F303CBTx

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the STM32F303CBTx connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 12 of 12 designs, most often 100 nF (then 4.7 µF).
  • The VBAT pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 10 nF).
  • The VDDA pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 10 nF).
  • The BOOT0 pin has a resistor to GND on 11 of 12 designs, most often 10 kΩ (then 1 kΩ).
VBATpin 1Connected to: 3.3V 92%
  • Decoupling capacitor on 92% · 100 nF (18), 10 nF (2), 4.7 µF (2)
PF0pin 5Connected to: Signal 92%
  • Crystal on 83% · 8 MHz (6)
  • Capacitor to GND on 67% · 18 pF (3), 30 pF (2), 22 pF (1)
PF1pin 6Connected to: Signal 92%
  • Crystal on 58% · 8 MHz (2), 16 MHz (1)
  • Capacitor to GND on 42% · 30 pF (2), 22 pF (1), 12 pF (1)
  • Series resistor on 33% · 1 kΩ (3), 0 Ω (1)
NRSTpin 7Connected to: A connector 58%, USBLC6-4SC6 25%
  • Capacitor to GND on 83% · 100 nF (10)
  • Pull-up to 3.3V on 33% · 10 kΩ (2), 100 kΩ (1), 1 kΩ (1)
VSSApin 8Connected to: GND 100%
VDDApin 9Connected to: 3.3V 58% · a signal 42%
  • Decoupling capacitor on 92% · 100 nF (7), 10 nF (4), 1 µF (3)
PA1pin 11Connected to: Signal 75% · not connected 25%
  • Pull-up to 3.3V on 33% · 15 kΩ (3), 10 kΩ (1)
PA3pin 13Connected to: Signal 92%
  • Series resistor on 42% · 249 kΩ (3), 300 Ω (1), 100 Ω (1)
  • Capacitor to GND on 33% · 18 pF (3)
PA5pin 15Connected to: Signal 75% · not connected 25%
  • Series resistor on 33% · 249 kΩ (3), 7.5 kΩ (1)
PA7pin 17Connected to: Signal 75% · not connected 25%
  • Series resistor on 33% · 470 Ω (3), 100 Ω (1)
PB0pin 18Connected to: Signal 67% · not connected 33%
  • Capacitor to GND on 33% · 18 pF (3), 100 nF (1)
  • Series resistor on 33% · 470 Ω (3), 1 MΩ (1)
VSSpin 23, 35, 47Connected to: GND 100%
VDDpin 24, 36, 48Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (43), 4.7 µF (6), 1 µF (1)
PB12pin 25Connected to: Signal 58% · not connected 42%
  • Resistor to GND on 33% · 3.9 kΩ (3)
PB14pin 27Connected to: IRAM256a 25%, a connector 25% · not connected 25%
  • Pull-up to 3.3V on 33% · 10 kΩ (4)
PA11pin 32Connected to: USBLC6-4SC6 25%
  • Series resistor on 58% · 22 Ω (4), 33 Ω (1), 1 kΩ (1)
PA12pin 33Connected to: USBLC6-4SC6 25%
  • Series resistor on 50% · 22 Ω (4), 33 Ω (1), 0 Ω (1)
PB7pin 43Connected to: IRAM256a 25% · not connected 33%
  • Series resistor on 33% · 1 kΩ (4)
BOOT0pin 44Connected to: Signal 92%
  • Resistor to GND on 92% · 10 kΩ (6), 1 kΩ (4), 1 MΩ (1)

25 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Stmbl 4.0 by rene-dev, Steamvan by jmdaly, CO60 by jmdaly and Stmbl 4.0 by coon42.

The STM32F303CBTx in open source designs

The gallery holds 14 open source boards using the STM32F303CBTx from 12 GitHub repositories; a typical one measures about 91 × 84.8 mm and carries around 138 components.

57% use four copper layers or more, and 64% carry an open source license.

The most starred is Stmbl 4.0 by rene-dev.

Microcontrollers on boards using the STM32F303CBTx

What boards using the STM32F303CBTx are built for

STM32F303CBTx: common questions

Where can I find a STM32F303CBTx reference design?

Each of the 14 boards on this page is a real design using the STM32F303CBTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F303CBTx VDD pin?

The VDD pins have a decoupling capacitor on 12 of 12 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 12 open source designs using the STM32F303CBTx.

What decoupling capacitors do designs use on the STM32F303CBTx VBAT pin?

The VBAT pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 12 open source designs using the STM32F303CBTx.

What decoupling capacitors do designs use on the STM32F303CBTx VDDA pin?

The VDDA pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 12 open source designs using the STM32F303CBTx.

What parts are used alongside the STM32F303CBTx?

The ACT4088, IRAM256a, LM358, lnk304D and non_plated appear in the most repositories here.

Which microcontrollers do boards using the STM32F303CBTx use?

Most are built on STM32 (14).

How big is a typical board using the STM32F303CBTx?

The median is 91 × 84.8 mm, and 43% are two-layer designs.

What is the most popular open source board using the STM32F303CBTx?

By GitHub stars, Stmbl 4.0 by rene-dev, with 979 stars.

Can I simulate one of these boards using the STM32F303CBTx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part