Krone-FBUE
CatoLynx·Krone-FBUE
About the Krone-FBUE PCB
Krone-FBUE is an open source PCB design by CatoLynx, published on GitHub. It is a 2-layer board measuring 64.6 × 36.8 mm, with 10 components from 8 distinct parts.
Other key parts include the 74HC165. By type, the board carries 4 capacitors, 2 connectors, 2 resistors, 1 IC and 1 switch.
From the project
Remake of the KRONE / MAN "FBUE" split-flap address board
Main components on the Krone-FBUE
Krone-FBUE bill of materials (BOM)
10 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC165 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U1 |
| 1 | Cable | IDC_Header_Straight_20pins | J1 |
| 1 | Module | Pin_Header_Straight_2x05 | J2 |
| 1 | Address | SW_DIP_x8_Slide_SolderJumpers | SW1 |
| 1 | 10n/100V | C_0805 | C1 |
| 1 | 22µ/25V | CP_Tantalum_Case-D_EIA-7343-31_Reflow | C2 |
| 2 | 100n/50V | C_0603 | C3, C4 |
| 2 | 4x10k | R_Array_Convex_4x0603 | RN1, RN2 |
Krone-FBUE design files
The KiCad project lives in the CatoLynx/Krone-FBUE repository on GitHub; these links point at the commit this page was built from.
- LayoutMAN Adapterplatine.kicad_pcb
- SchematicMAN Adapterplatine.kicad_sch
- BOMBOM_Elecrow.xlsx
Krone-FBUE: common questions
How big is the Krone-FBUE PCB?
The Krone-FBUE measures 64.6 × 36.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Krone-FBUE?
10 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Krone-FBUE design files?
From the CatoLynx/Krone-FBUE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Krone-FBUE design in my own project?
The repository has no license, so all rights stay with CatoLynx. Use it as a reference, and ask the author before reusing the design.