170 open source boards using the 74HC165
Real designs built with the 74HC165, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
OpenDeck r3.1.2
shanteacontrols
181 × 97 mm258 parts2LApache-2.0956Minimal-64x4-Home-Computer
slu4coder
245.1 × 160 mm134 parts2LNo license3238-Bit CPU 32k
slu4coder
196.9 × 125.1 mm101 parts2LNo license184STM32
PER|FORMER eurorack sequencer
westlicht
171.5 × 106.7 mm304 parts2LCC-BY-NC-4.0110Minimal-64-Home-Computer
slu4coder
306.1 × 130.2 mm127 parts2LNo license93AVR/Arduino
TR-808-Clone
minisystem
300 × 105 mm1058 parts2LNo license67ESP32
PCBA-KNOT
intechstudio
56 × 60 mm110 parts4LGPL-3.057AVR/Arduino
Minimal-UART-Computer-3
slu4coder
208.9 × 170.8 mm202 parts2LNo license43RP2040/RP2350
USB Flash/EPROM Programmer
robsonsmartins
148.8 × 132.2 mm121 parts2LCC-BY-NC-4.035Midikraken TRS
Windfisch
56 × 110 mm118 parts2LNo license27NXP
Control panel with Teensy4 and 192x64 VFD
mariosgit
178.3 × 100.1 mm93 parts2LMIT27AVR/Arduino
Mtg life counter
mprosk
167.6 × 101.6 mm85 parts2LCERN-OHL-S-2.019KVL
yamamo2shun1
279.5 × 95 mm245 parts2LMIT16STM32
Taiko-Input
AnalogDragon
85 × 100 mm235 parts2LCustom license16Input shifter board
MobiFlight
80 × 80 mm138 parts2LNo license16Jcap
cspang1
136.8 × 87 mm63 parts2LMIT15STM32
Midi fader
kcuzner
73.7 × 78.7 mm91 parts2LApache-2.012ESP32
Controller
phorton1
144.8 × 104.1 mm66 parts2LGPL-3.012TapeLooper MainBoard
TheSlowGrowth
119.6 × 106.5 mm243 parts2LCustom license10Zf vga
tangent3D
143 × 85 mm52 parts2LMIT10STM32
KiCad
dirktjantele
172 parts6LGPL-3.09STM32
Liv Synth
SloBloLabs
230 × 159.9 mm273 parts2LMIT7RP2040/RP2350
SnakeBoard
Nadoooor
315 × 152.4 mm193 parts2LMIT574HC165-breakout board
neilenns
88 × 40 mm29 parts2LMIT5STM32
Maslab
maslab-5
99.1 × 99.1 mm317 parts4LNo license4WEASEL
joebmz98
335 × 200 mm216 parts2LMIT3RP2040/RP2350
V4d2 pico
tomcombriat
54.2 × 94.2 mm99 parts2LTAPR-OHL-1.03Internal sdcard interface
ifilot
219 × 88 mm77 parts2LNo license3AutoPLC
dezamora98
208.9 × 119.9 mm358 parts2LNo license2AVR/Arduino
Automata Generator Standard
Sirawit7205
246.4 × 127 mm121 parts2LNo license274hc165-breakout
sourcebox
114 × 53 mm95 parts2LCC-BY-4.02BeanBoardSPI
PainfulDiodes
199.4 × 80 mm42 parts4LMIT2ESP32
SlimeVR Dock
Skaut0071
100 × 78 mm151 parts2LCERN-OHL-P-2.01Controller mcu bu an 64
Mo-MoS
99 × 99 mm116 parts4LNo license1Nordic nRF
Split-Keyboard with-Joystick
Shadow220108
312.4 × 114.1 mm108 parts2LNo license1AVR/Arduino
Ofen v2
Ulf-vom-Mond
109.2 × 63.5 mm58 parts2LNo license1
How designs wire the 74HC165
Read from the KiCad layouts of 113 open source designs, one per repository: what each pin of the 74HC165 connects to, and the resistors, capacitors and other passives placed on it.
- The CE pin is tied to GND on 89 of 110 designs (not connected on 2, 3.3V on 2, a signal on 17).
- The VCC pin has a decoupling capacitor on 73 of 111 designs, most often 100 nF (then 1 µF).
- The D0 pin has a pull-up to 3.3V on 50 of 111 designs, most often 10 kΩ (then 47 kΩ).
- The D1 pin has a pull-up to 3.3V on 49 of 111 designs, most often 10 kΩ (then 47 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| D4pin 3 | Connected to: A connector 28% |
|
| D5pin 4 | Connected to: A connector 29% |
|
| D6pin 5 | Connected to: A connector 27% |
|
| GNDpin 8 | Connected to: GND 96% | — |
| D0pin 11 | Connected to: A connector 28% |
|
| D1pin 12 | Connected to: A connector 29% |
|
| D2pin 13 | Connected to: A connector 28% |
|
| D3pin 14 | Connected to: A connector 27% |
|
| CEpin 15 | Connected to: GND 81% · a signal 15% | — |
| VCCpin 16 | Connected to: 5V 94% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ChainlinkDriver by scottbez1, ButtonsLEDs by shanteacontrols, Gamepad by vsfteam and Minimal-64x4-Home-Computer by slu4coder.
The 74HC165 in open source designs
The gallery holds 170 open source boards using the 74HC165 from 115 GitHub repositories; a typical one measures about 100 × 87.2 mm and carries around 66 components.
89% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.
The most starred is ChainlinkDriver by scottbez1.
Parts used alongside the 74HC165
Microcontrollers on boards using the 74HC165
What boards using the 74HC165 are built for
74HC165: common questions
Where can I find a 74HC165 reference design?
Each of the 170 boards on this page is a real design using the 74HC165. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74HC165 CE pin connected?
The CE pin is tied to GND on 89 of 110 designs (not connected on 2, 3.3V on 2, a signal on 17). Counted from the KiCad layouts of 113 open source designs using the 74HC165.
What decoupling capacitors do designs use on the 74HC165 VCC pin?
The VCC pin has a decoupling capacitor on 73 of 111 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 113 open source designs using the 74HC165.
What pull-up resistor is used on the 74HC165 D0 pin?
The D0 pin has a pull-up to 3.3V on 50 of 111 designs, most often 10 kΩ (then 47 kΩ). Counted from the KiCad layouts of 113 open source designs using the 74HC165.
What parts are used alongside the 74HC165?
The 74HC595, 74HC00, 74HC04, 74HC32 and 74HC138 appear in the most repositories here.
Which microcontrollers do boards using the 74HC165 use?
Most are built on AVR/Arduino (31), RP2040/RP2350 (17), STM32 (10) and ESP32 (7).
How big is a typical board using the 74HC165?
The median is 100 × 87.2 mm, and 89% are two-layer designs.
What is the most popular open source board using the 74HC165?
By GitHub stars, ChainlinkDriver by scottbez1, with 4,156 stars.
Can I simulate one of these boards using the 74HC165 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.