Pcbdesarrollo
cdrfiuba·pcbdesarrollo·placa/pcbdesarrollo.kicad_pcb
About the Pcbdesarrollo PCB
Pcbdesarrollo is an open source PCB design by cdrfiuba, published on GitHub. It is a board measuring 78 × 94.9 mm, with 52 components from 29 distinct parts.
Other key parts include the MAX232, AVR_ATMEGA88, 7805FIX and AP1117T33. By type, the board carries 16 capacitors, 7 jumpers, 7 resistors, 6 connectors, 5 diodes and 4 ICs.
Main components on the Pcbdesarrollo
Pcbdesarrollo bill of materials (BOM)
52 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX232 | DIP-16__300_ELL | U1 |
| 1 | AVR_ATMEGA88 | DIP-28__300_ELL | U2 |
| 1 | 7805FIX | TO-220_Neutral123_Vertical_LargePads | U3 |
| 1 | AP1117T33 | TO-220_Neutral123_Vertical_LargePads | U4 |
| 1 | 18.432 Mhz | HC-18UV | X1 |
| 1 | DB9 | DB9-F | J1 |
| 1 | CONN_3X2 | Socket_Strip_Straight_2x03 | P1 |
| 1 | BATT | molex_2_recto | P2 |
| 1 | CONN_3 | Socket_Strip_Straight_1x03 | P3 |
| 1 | CONN_02X20 | Socket_Strip_Straight_2x20 | P4 |
| 1 | BATT | bornier2 | P6 |
| 1 | P*** | 1pin | 1PIN |
| 2 | CONN_14 | Socket_Strip_Straight_1x14 | CONN1, CONN2 |
| 7 | JUMPER | Socket_Strip_Straight_1x02 | JP1, JP2, JP3, JP4, JP5, JP6, JP7 |
| 1 | I2C | Socket_Strip_Straight_1x03 | K1 |
| 1 | PULSADOR | SW_PUSH_SMALL | SW1 |
| 1 | RESET | SW_PUSH_SMALL | SW2 |
| 1 | LED1 | LED-3MM | D1 |
| 1 | LED2 | LED-3MM | D2 |
| 1 | LED3 | LED-3MM | D3 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED4 | LED-3MM | D4 |
| 1 | ON | LED-3MM | D5 |
| 5 | 1uF | C_Radial_D5_L6_P2.5 | C1, C2, C3, C4, C5 |
| 6 | 100nF | C_Disc_D3_P2.5 | C6, C7, C9, C14, C15, C16 |
| 3 | 10uF | C_Radial_D5_L6_P2.5 | C8, C10, C11 |
| 2 | 15p | C_Disc_D3_P2.5 | C12, C13 |
| 5 | 220 | Resistor_Horizontal_RM10mm | R1, R2, R3, R4, R6 |
| 1 | 1K | Resistor_Horizontal_RM10mm | R5 |
| 1 | 10k | Resistor_Horizontal_RM10mm | R7 |
Pcbdesarrollo design files
The KiCad project lives in the cdrfiuba/pcbdesarrollo repository on GitHub; these links point at the commit this page was built from.
Pcbdesarrollo: common questions
How big is the Pcbdesarrollo PCB?
The Pcbdesarrollo measures 78 × 94.9 mm and is 1.6002 mm thick.
How many components are on the Pcbdesarrollo?
52 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pcbdesarrollo design files?
From the cdrfiuba/pcbdesarrollo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pcbdesarrollo design in my own project?
The repository has no license, so all rights stay with cdrfiuba. Use it as a reference, and ask the author before reusing the design.