MK26Z256VLL4
About the MK26Z256VLL4 PCB
MK26Z256VLL4 is an open source NXP PCB design by cecilwabuti, published on GitHub. It is a 2-layer board measuring 58.4 × 48.3 mm, with 18 components from 13 distinct parts.
Its main chip is the MKL46Z256VLL4, from the NXP family. By type, the board carries 4 connectors, 4 resistors, 3 capacitors, 2 diodes, 2 inductors and 1 IC.
From the project
Kicad project for a board bring up using board 100pins Mk26z processor
Main components on the MK26Z256VLL4
MK26Z256VLL4 bill of materials (BOM)
18 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MKL46Z256VLL4 | LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | 8MHZ | Crystal_SMD_EuroQuartz_MJ-4Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | USB_B_Mini | USB_Mini-B_Lumberg_2486_01_Horizontal | J1 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J2 |
| 2 | Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J3, J4 |
| 1 | EQV-PE105K | SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 2 | D_Zener_Small | D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 2 | 330OHM | L_1206_3216Metric_Pad1.42x1.75mm_HandSolder | L1, L2 |
| 2 | 22PF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C3 |
| 1 | 0.1UF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2 |
| 2 | 33 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2 |
| 1 | 1.0M | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3 |
| 1 | 10K | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R4 |
MK26Z256VLL4 design files
The KiCad project lives in the cecilwabuti/MK26Z256VLL4 repository on GitHub; these links point at the commit this page was built from.
MK26Z256VLL4: common questions
What microcontroller does the MK26Z256VLL4 use?
The MK26Z256VLL4 is built around the MKL46Z256VLL4, from the NXP family.
How big is the MK26Z256VLL4 PCB?
The MK26Z256VLL4 measures 58.4 × 48.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MK26Z256VLL4?
18 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the MK26Z256VLL4 design files?
From the cecilwabuti/MK26Z256VLL4 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MK26Z256VLL4 design in my own project?
The repository has no license, so all rights stay with cecilwabuti. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MK26Z256VLL4 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532