STM32L151VDT Module
celeritous·STM32L151VDT_Module·STM32L151VDT_Module_Hardware/Rev1.0/STM32L151VDT_Module.kicad_pcb
About the STM32L151VDT Module
STM32L151VDT Module is an open source STM32 PCB design by celeritous, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 48 components from 26 distinct parts.
Its main chip is the STM32L151VDT, from the STM32 family. Other key parts include the 24AA02E64OT, MCP1501-30, AP2152 and MODULE_ESP07_WIFI. By type, the board carries 21 capacitors, 8 resistors, 7 connectors, 4 ICs, 3 diodes and 2 crystals.
From the project
STM32L151VDT_Module
The design is in KiCad and is released under the CERN OHL Ver 1.2 It is on a 50mm x 50mm 4 layer PCB with two 38 Pin dual row 100mil headers for user power and IO. There is no on-board voltage regulation so the user must supply regulated 1.8V-3.3V power to the board. Voltages in excess of this may damage the board. The board may operate as low as 1.65V but not all peripherals will operate at this voltage and full clock speed maynot be supported. The processor is capable of internal cclock speeds of up to 32MHz.
Main components on the STM32L151VDT Module
STM32L151VDT Module bill of materials (BOM)
48 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L151VDT | QFP_100_14X14_0.5 | U1 |
| 1 | 24AA02E64OT | SOT23-6 | U2 |
| 1 | MCP1501-30 | SOT23-6 | U3 |
| 1 | AP2152 | SOIC_8 | U4 |
| 1 | MODULE_ESP07_WIFI | MODULE_ESP07_WIFI | MOD1 |
| 1 | ABM8G-12.00MHz | XTAL_3.2X2.5 | X1 |
| 1 | ABS10-32.768kHz | XTAL_1.8X4.9mm | X2 |
| 1 | SOCKET_MICRO_SD_SMT_3M | CONN_SDMICRO_3M | J1 |
| 1 | USB_MINI_B_SMD | CONN_USB_UX60-MB | J2 |
| 2 | Header_2x1 | Header_2x1_Shrouded_100mil | P1, P2 |
| 2 | Header_2x17 | Header_2x17_Shrouded_100mil | P3, P4 |
| 1 | CONN_1x4 | Connector_1x4_100mil_TH | P5 |
| 1 | FUSE_PTC_.5A_33V | P1812 | F1 |
| 1 | Led_Small | D0805 | D1 |
| 1 | SMLJ33ABCT | DO220AA | D2 |
| 1 | USBLC6-2 | SOT23-6 | D3 |
| 1 | FERRITE_BEAD | P0603 | L1 |
| 4 | 12pF | P0603 | C1, C2, C3, C4 |
| 8 | 0.10uF | P0603 | C5, C7, C9, C11, C13, C15, C17, C19 |
| 8 | 10.0uF | P0603 | C6, C8, C10, C12, C14, C16, C18, C20 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1.0uF | P0603 | C21 |
| 4 | 4.70kΩ | P0603 | R1, R2, R3, R4 |
| 1 | 1.00kΩ | P0603 | R5 |
| 1 | 10.0kΩ | P0603 | R6 |
| 1 | 1.50kΩ | P0603 | R7 |
| 1 | ZERO_Ω | P0603 | R8 |
STM32L151VDT Module design files
The KiCad project lives in the celeritous/STM32L151VDT_Module repository on GitHub; these links point at the commit this page was built from.
STM32L151VDT Module: common questions
What microcontroller does the STM32L151VDT Module use?
The STM32L151VDT Module is built around the STM32L151VDT, from the STM32 family.
How big is the STM32L151VDT Module?
The STM32L151VDT Module measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32L151VDT Module?
48 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32L151VDT Module design files?
From the celeritous/STM32L151VDT_Module repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STM32L151VDT Module design in my own project?
The repository has no license, so all rights stay with celeritous. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32L151VDT Module without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k