4 open source boards using the MCP1501-30

Real designs built with the MCP1501-30, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The MCP1501-30 in open source designs

The gallery holds 4 open source boards using the MCP1501-30 from 2 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 61 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is STM32L151VDT Module by celeritous.

Parts used alongside the MCP1501-30

Microcontrollers on boards using the MCP1501-30

MCP1501-30: common questions

Where can I find a MCP1501-30 reference design?

Each of the 4 boards on this page is a real design using the MCP1501-30. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MCP1501-30 use?

Most are built on STM32 (4).

How big is a typical board using the MCP1501-30?

The median is 50 × 50 mm, and 100% are two-layer designs.

What is the most popular open source board using the MCP1501-30?

By GitHub stars, STM32L151VDT Module by celeritous, with 1 stars.

Can I simulate one of these boards using the MCP1501-30 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part