X4r sb
chickadee-tech·x4r-sb·pcb/x4r-sb.kicad_pcb
About the X4r sb PCB
X4r sb is an open source PCB design by chickadee-tech, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 36 × 36 mm, with 23 components from 18 distinct parts.
Other key parts include the 74LS86. By type, the board carries 8 connectors, 1 IC, 1 transistor, 1 diode, 1 capacitor and 1 resistor.
From the project
X4R-SB Cradle Polystack Mod
You may also license the Polystack logo for free by emailing support@chickadee.tech. We'll ask for your gerbers to ensure the design complies with specifications laid out here and provide written permission to use the trademark after compliance has been demonstrated.
Main components on the X4r sb
X4r sb bill of materials (BOM)
23 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS86 | QFN-14-3.5x3.5mm | U1 |
| 1 | Q_NMOS_GSD | SOT-23_Handsoldering | Q1 |
| 1 | CONN_01X04 | Pin_Header_Straight_1x04 | P1 |
| 1 | CONN_02X06 | Pin_Header_Angled_2x06 | P2 |
| 1 | CONN_01X02 | Pin_Header_Angled_1x02 | P3 |
| 5 | CONN_01X01 | Measurement_Point_Round-SMD-Pad_Small | P5, P7, P8, P9, P10 |
| 1 | SN74LVC1G0832 | SC-70-6_Handsoldering | PORT_ANDOR1 |
| 1 | 0.1uF | C_0603_HandSoldering | PORT_C1 |
| 1 | AT24CS02-MAHM | DFN-8-1EP_3x2mm_Pitch0.5mm | PORT_IC1 |
| 1 | CKD_SANDWICH | DF40-80pin-Header | PORT_IN1 |
| 2 | SN74LVC1G58 | SC-70-6_Handsoldering | PORT_INV1, PORT_XOR1 |
| 1 | CKD_SANDWICH | DF40-3-4mm-80pin-Receptacle | PORT_OUT1 |
| 1 | CONN_01X01 | Measurement_Point_Round-SMD-Pad_Small | PORT_P1 |
| 1 | 10k | R_0603_HandSoldering | PORT_R1 |
| 1 | G*** | polystack-bold-0.4 | svg2mod |
| 1 | D_Schottky_Small | SOD-523 | D1 |
| 1 | 10uF | C_1206_HandSoldering | C1 |
| 1 | 10k | R_0603_HandSoldering | R1 |
X4r sb design files
The KiCad project lives in the chickadee-tech/x4r-sb repository on GitHub; these links point at the commit this page was built from.
X4r sb: common questions
How big is the X4r sb PCB?
The X4r sb measures 36 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the X4r sb?
23 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the X4r sb design files?
From the chickadee-tech/x4r-sb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the X4r sb design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which chickadee-tech chose for the repository.