80 open source boards using the 74LS86

Real designs built with the 74LS86, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

80 boardsClear filters|Most starred

How designs wire the 74LS86

Read from the KiCad layouts of 65 open source designs, one per repository: what each pin of the 74LS86 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 7Connected to: GND 95%
VCCpin 14Connected to: VCC 92%
  • Decoupling capacitor on 34% · 100 nF (19), 10 nF (4), 100 pF (1)

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Space Odyssey by jotego, Alu by jes, Sch by DownUnderCTF and CGA Redux by hkzlab.

The 74LS86 in open source designs

The gallery holds 80 open source boards using the 74LS86 from 70 GitHub repositories; a typical one measures about 165.1 × 114.3 mm and carries around 80 components.

80% are two-layer designs, the rest use four layers or more, and 41% carry an open source license.

The most starred is Space Odyssey by jotego.

Microcontrollers on boards using the 74LS86

74LS86: common questions

Where can I find a 74LS86 reference design?

Each of the 80 boards on this page is a real design using the 74LS86. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 74LS86?

The 74LS08, 74LS32, 74LS04, 74LS245 and 74LS00 appear in the most repositories here.

Which microcontrollers do boards using the 74LS86 use?

Most are built on AVR/Arduino (4).

How big is a typical board using the 74LS86?

The median is 165.1 × 114.3 mm, and 80% are two-layer designs.

What is the most popular open source board using the 74LS86?

By GitHub stars, Space Odyssey by jotego, with 335 stars.

Can I simulate one of these boards using the 74LS86 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part