Submission

chilly23·PCBGolf-master-Comma.ai·Rev A/submission/KiCad files submission - Velan/Submission.kicad_pcb

Submission PCB layout, top view — open source STM32 board by chilly23

About the Submission PCB

Submission is an open source STM32 PCB design by chilly23, published on GitHub under the MIT license. It is a 4-layer board measuring 35 × 65 mm, with 243 components from 63 distinct parts.

Its main chip is the STM32H725ZGTX, from the STM32 family. Other key parts include the AP62300T, USB2517, MCP2542FDT-E/MNY, NCS20071XV and TPS25942. By type, the board carries 123 resistors, 53 capacitors, 23 ICs, 17 LEDs, 9 transistors and 8 inductors.

From the project

Compact PCB studies for the comma.ai PCBGolf challenge, including KiCad and EasyEDA designs, BOMs, STEP models, and routing-status reports.

PCB layout studies based on comma.ai's PCBGolf challenge. This repository contains reference files, EasyEDA projects, KiCad conversions, BOMs, and mechanical models.

The image above belongs to the upstream challenge material. It does not show a checked final submission from this repository.

The later design studies are incomplete. Do not treat them as fabrication-ready boards.

Submission, from the project README
From the project README

Main components on the Submission

AP62300TSTM32H725ZGTXUSB2517MCP2542FDT-E/MNYNCS20071XVTPS25942

Submission bill of materials (BOM)

243 components, 63 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
AP62300T
U1, U2
1
STM32H725ZGTX
U3
1
USB2517
U4
2
MCP2542FDT-E/MNY
U5, U6
2
MCP2542FDT-E/MNY
U7, U8
2
NCS20071XV
U9, U10
1
NCS20071XV
U11
1
NCS20071XV
U12
3
TPS25942
U13, U14, U15
1
TPS25942
U16
2
—
U17, U18
1
—
U19
1
—
U20
1
—
U21
1
—
U22
1
—
U23
1
SIS427-VI
Q1
8
NFET-DUAL-COMMON-SOURCE-QS5K2
Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9
1
—
X1
1
DCBARRELSMT
J1
Show 43 more
QtyPartRefs
1
MICRO_SD-0472192001
J2
4
—
SCREW1, SCREW2, SCREW3, SCREW4
1
SPST-2-4PIN
SW1
1
CREE-RGB-CLMVC
LED1
1
CAN0
LED2
1
CAN1
LED3
1
CAN2
LED4
1
CAN3
LED5
4
CH1_PWR
LED6, LED7, LED8, LED9
3
LED-CC-GREEN-RED-AM23ESG
LED10, LED11, LED12
4
LED-CC-GREEN-RED-AM23ESG
LED13, LED14, LED15, LED16
1
LED-CC-GREEN-RED-AM23ESG
LED17
1
TVS-BI-DO214AA
D1
1
DIODEDB2W40100L
D2
2
3U3
3u3
L1, L2
1
L-US-L2
L3
1
2U2
2u2
L4
2
ACT1210D_CHOKE
L5, L6
1
ACT1210D_CHOKE
L7
1
ACT1210D_CHOKE
L8
3
10UF
10uF
C1, C8, C13
7
100NF
100nF
C2, C7, C30, C31, C39, C48, C49
6
10UF
10uF
C3, C12, C15, C19, C20, C21
22
100NF
100nF
C4, C5, C9, C11, C16, C18, C22, C23 +14
2
DNP
C6, C10
4
12PF
12pF
C14, C17, C28, C32
1
220PF
220pF
C25
6
10U
10u
C29, C33, C34, C50, C51, C53
2
10U
10u
C37, C52
41
10K
10k
R1, R3, R7, R8, R9, R11, R12, R28 +33
10
1k
R2, R21, R23, R90, R92, R94, R96, R114 +2
17
100K
100k
R4, R5, R6, R13, R14, R15, R16, R17 +9
1
52K3
52k3
R10
5
2K7
2k7
R22, R62, R63, R64, R65
1
1M
R26
1
12K
12k
R27
6
0R
R38, R39, R40, R41, R42, R43
4
60
R46, R47, R48, R49
4
28K
28k
R66, R67, R68, R69
4
33K
33k
R70, R71, R72, R73
4
3K3
3k3
R74, R75, R76, R77
24
100
R82, R83, R84, R85, R86, R87, R88, R89 +16
1
1k
R118

Submission design files

The KiCad project lives in the chilly23/PCBGolf-master-Comma.ai repository on GitHub; these links point at the commit this page was built from.

Submission: common questions

What microcontroller does the Submission use?

The Submission is built around the STM32H725ZGTX, from the STM32 family.

How big is the Submission PCB?

The Submission measures 35 × 65 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Submission?

243 components, from 63 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Submission design files?

From the chilly23/PCBGolf-master-Comma.ai repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Submission design in my own project?

Yes, under the terms of its MIT license, which chilly23 chose for the repository.

Can I test firmware for the Submission without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in PCBGolf-master-Comma.ai

Similar boards