Sensorilauta
About the Sensorilauta PCB
Sensorilauta is an open source PCB design by chiplet, published on GitHub. It is a 2-layer board measuring 29.2 × 29.5 mm, with 12 components from 10 distinct parts.
Other key parts include the MCP6001U. By type, the board carries 4 resistors, 3 diodes, 1 IC, 1 transistor, 1 connector and 1 capacitor.
From the project
Kircular Accelerator Prototype Innovative New Experience
This project uses components from digikey-kicad-library which is configured as a git submodule of this project. Git doesn't clone submodules of a project by default when the project it is cloned so this has to be done manually.
Application Signal Descriptions m[0..15] -- Electromagnet control signals s[0..15] -- Photogate sensor input signals Debug 1 -- Debug led 1 Debug 2 -- Debug led 2 * USART1 -- Command link UART
Main components on the Sensorilauta
Sensorilauta bill of materials (BOM)
12 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP6001U | SOT-23-5_HandSoldering | U1 |
| 1 | Q_Photo_NPN | PinHeader_2x01_P2.54mm_Vertical | Q1 |
| 1 | motherboard connector | PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | trimpot | Potentiometer_Vishay_TS53YJ_Vertical | RV1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | LED_Small | LED_0805_2012Metric_Castellated | D2 |
| 1 | IR LED | PinHeader_2x01_P2.54mm_Vertical | D3 |
| 1 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 3 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3 |
| 1 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
Sensorilauta design files
The KiCad project lives in the chiplet/kapine repository on GitHub; these links point at the commit this page was built from.
Sensorilauta: common questions
How big is the Sensorilauta PCB?
The Sensorilauta measures 29.2 × 29.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensorilauta?
12 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensorilauta design files?
From the chiplet/kapine repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sensorilauta design in my own project?
The repository has no license, so all rights stay with chiplet. Use it as a reference, and ask the author before reusing the design.
