Usb to ps2-gameport hat
About the Usb to ps2-gameport hat
Usb to ps2-gameport hat is an open source PCB design by ChrisDeadman, published on GitHub under the MIT license. It is a 2-layer board measuring 51.3 × 40 mm, with 26 components from 18 distinct parts.
By type, the board carries 10 capacitors, 3 resistors, 2 connectors, 2 LEDs and 1 inductor.
It belongs with the dev boards & breakouts, usb & debug tools and keyboards designs in this gallery.
From the project
Convert USB devices to PS/2 & Gameport devices with the power of Arduino 🙂
Usb => PS/2 & Gameport HAT v1.4 ===============================
I made sure to pick parts with good availability so I could order all of them at once at Mouser.
I ordered at EuroCircuits for this project but e.g. JLCPCB should also be fine!
Should you want to generate them yourself, you need to install KiCad to open the project and export the gerber files, JLCPCB has a nice tutorial of how to do that.
Usb to ps2-gameport hat bill of materials (BOM)
26 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Digital | PinSocket_1x12_P2.54mm_Vertical | P1 |
| 1 | Analog | PinSocket_1x12_P2.54mm_Vertical | P2 |
| 1 | Jumper 3-pin | PinHeader_1x03_P2.54mm_Vertical | 5V Select1 |
| 1 | 3-pin header | PinHeader_1x03_P2.54mm_Vertical | Debug Conn1 |
| 1 | PI4ULS5V108 | TSSOP-20_4.4x6.5mm_P0.65mm | IC_LC1 |
| 1 | AD8403ARUZ100 | SOP65P640X120-24N | IC_POT1 |
| 1 | KMDGX-6S-BS Mouse | KMDGX6SBS | J_PS/2_1 |
| 1 | KMDGX-6S-BS Keyboard / Mouse | KMDGX6SBS | J_PS/2_2 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | Shield GND1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | USB Power1 |
| 2 | 2-pin header | PinHeader_1x02_P2.54mm_Vertical | LED1, LED2 |
| 1 | Ferrite_Bead | L_0603_1608Metric | FB1 |
| 2 | 10nF | C_0603_1608Metric | C1, C6 |
| 3 | 100nF | C_0603_1608Metric | C2, C4, C5 |
| 1 | 10uF | CP_Elec_4x5.4 | C3 |
| 4 | 15nF | C_0603_1608Metric | C7, C8, C9, C10 |
| 2 | 330R | R_0603_1608Metric | R1, R2 |
| 1 | 200k | R_0603_1608Metric | R3 |
Usb to ps2-gameport hat design files
The KiCad project lives in the ChrisDeadman/usb-to-ps2-gameport-hat repository on GitHub; these links point at the commit this page was built from.
Usb to ps2-gameport hat: common questions
How big is the Usb to ps2-gameport hat?
The Usb to ps2-gameport hat measures 51.3 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usb to ps2-gameport hat?
26 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Usb to ps2-gameport hat design files?
From the ChrisDeadman/usb-to-ps2-gameport-hat repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Usb to ps2-gameport hat design in my own project?
Yes, under the terms of its MIT license, which ChrisDeadman chose for the repository.
byrantech
google