Kicad heizungsregler

christof1977·kicad-heizungsregler

Kicad heizungsregler PCB layout, top view — open source board by christof1977

About the Kicad heizungsregler PCB

Kicad heizungsregler is an open source PCB design by christof1977, published on GitHub under the MIT license. It is a 2-layer board measuring 19.4 × 40.3 mm, with 3 components from 3 distinct parts.

Other key parts include the oled_0.96. By type, the board carries 1 IC, 1 connector and 1 inductor.

It belongs with the displays & leds designs in this gallery.

From the project

basierend auf Raspberry Pi Zero - 10BaseT Ethernet (ENC28J60) - Schmalspur PoE: 24V Eingang über die äusseren Päärchen - Step-Down-Converter auf 5V - MBus-Interface zum Auslesen von Wärmemengenzähler - Anschluss für OneWire-Temperatursensor - Anschluss für 8-Kanal-Relais-Karte -

basierend auf Raspberry Pi Zero - 10BaseT Ethernet (ENC28J60) - Schmalspur PoE: 24V Eingang über die äusseren Päärchen - Step-Down-Converter auf 5V - MBus-Interface zum Auslesen von Wärmemengenzähler - Anschluss für OneWire-Temperatursensor - Anschluss für 8-Kanal-Relais-Karte - Steckplatz für 0,96" Oled-Display - I2C-Anschluss - DS18B20 - Zwei Port für weitere OneWires

Kicad heizungsregler, from the project README
From the project README

Main components on the Kicad heizungsregler

oled_0.96

Kicad heizungsregler bill of materials (BOM)

3 components, 3 distinct parts.

QtyPartRefs
1
oled_0.96
U101
1
RPi_GPIO
J101
1
270U
L301

Kicad heizungsregler design files

The KiCad project lives in the christof1977/kicad-heizungsregler repository on GitHub; these links point at the commit this page was built from.

Kicad heizungsregler: common questions

How big is the Kicad heizungsregler PCB?

The Kicad heizungsregler measures 19.4 × 40.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kicad heizungsregler?

3 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kicad heizungsregler design files?

From the christof1977/kicad-heizungsregler repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Kicad heizungsregler design in my own project?

Yes, under the terms of its MIT license, which christof1977 chose for the repository.

Similar boards