4ChWirelessLaunchController
chrocket·RocketTrig·RemoteLaunch_Controller/4ChWirelessLaunchController - try 2 w relay pcb/4ChWirelessLaunchController.kicad_pcb
About the 4ChWirelessLaunchController PCB
4ChWirelessLaunchController is an open source PCB design by chrocket, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 75.3 × 99.7 mm, with 21 components from 15 distinct parts.
By type, the board carries 9 connectors, 6 relays and 6 resistors.
From the project
A camera controller for photographing high poweed model rockets
4ChWirelessLaunchController bill of materials (BOM)
21 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pad power and switch | CUI_TB007-508-02BE | J1 |
| 1 | Control board | CUI_TB007-508-06BE | J2 |
| 1 | Pad ch 1 | CUI_TB007-508-04BE | J3 |
| 1 | Pad ch 2 | CUI_TB007-508-04BE | J4 |
| 1 | Pad ch 3 | CUI_TB007-508-04BE | J5 |
| 1 | Pad ch 4 | CUI_TB007-508-04BE | J6 |
| 1 | Armed siren | CUI_TB007-508-02BE | J7 |
| 1 | LED/Buzzer Continuity indicator | CUI_TB007-508-02BE | J8 |
| 1 | LED power indicator | CUI_TB007-508-02BE | J9 |
| 2 | G8N-1L-DC12 | RELAY_G8N-1U-DC12 | K1, K6 |
| 1 | Ch 1 relay | RELAY_G8N-1U-DC12 | K2 |
| 3 | G8N-1U-DC12 | RELAY_G8N-1U-DC12 | K3, K4, K5 |
| 1 | 1000 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 4 | 1000 ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5 |
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
4ChWirelessLaunchController design files
The KiCad project lives in the chrocket/RocketTrig repository on GitHub; these links point at the commit this page was built from.
- LayoutRemoteLaunch_Controller/4ChWirelessLaunchController - try 2 w relay pcb/4ChWirelessLaunchController.kicad_pcb
- SchematicRemoteLaunch_Controller/4ChWirelessLaunchController - try 2 w relay pcb/4ChWirelessLaunchController.kicad_sch
- BOMRemoteLaunch_Controller/4ChWirelessLaunchController - try 2 w relay pcb/4ch Mouser BOM.xlsx
4ChWirelessLaunchController: common questions
How big is the 4ChWirelessLaunchController PCB?
The 4ChWirelessLaunchController measures 75.3 × 99.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 4ChWirelessLaunchController?
21 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 4ChWirelessLaunchController design files?
From the chrocket/RocketTrig repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 4ChWirelessLaunchController design in my own project?
Yes, under the terms of its GPL-3.0 license, which chrocket chose for the repository.