CameraTriggerSensorNodeOnly
chrocket·RocketTrig·RemoteLaunch_Controller/CameraTriggerRev 4_2 w Launch Controller 2023/CameraTriggerSensorNodeOnly.kicad_pcb
About the CameraTriggerSensorNodeOnly PCB
CameraTriggerSensorNodeOnly is an open source PCB design by chrocket, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 92.1 × 93.5 mm, with 55 components from 40 distinct parts.
Other key parts include the 3178, AMS1117CD-5.0, TLP291-4, MCP23017T-E/SO and ULN2803A. By type, the board carries 15 resistors, 13 connectors, 7 test points, 6 diodes, 5 ICs and 4 transistors.
From the project
A camera controller for photographing high poweed model rockets
Uses the CameraTrig board, as-is to create a wireless launch capability.
(Some pins for sensors are needed for a relay and LED).
Camera will trigger when "launch" is fired (for a two second "on")
Poll button becomes "clear", "Arm" is still "Arm" and "Trigger" becomes launch.
Press "Arm", which will arm system, after 15 sec, it will time out. - Will also go to disarm, if you hit "clear" - Will disarm after a launch.
Main components on the CameraTriggerSensorNodeOnly
CameraTriggerSensorNodeOnly bill of materials (BOM)
55 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3178 | 3178 | IC1 |
| 1 | AMS1117CD-5.0 | SOT-223 | U1 |
| 1 | TLP291-4 | SOIC-16_4.55x10.3mm_P1.27mm | U2 |
| 1 | MCP23017T-E/SO | SOIC-28W_7.5x17.9mm_P1.27mm | U4 |
| 1 | ULN2803A | SOIC127P1030X265-18N | U5 |
| 2 | 2SC1815 | SOT-23 | Q1, Q4 |
| 2 | MMBT3904 | SOT-23 | Q2, Q3 |
| 1 | Pwr switch | CUI_TB007-508-02BE | J1 |
| 1 | Camera 1 3.5mm | Jack_3.5mm_CUI_SJ1-3533NG_Horizontal_CircularHoles | J2 |
| 1 | Camera 2 3.5 mm | Jack_3.5mm_CUI_SJ1-3533NG_Horizontal_CircularHoles | J3 |
| 1 | Camera 1 Term | TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal | J4 |
| 1 | Camera 2 Term | TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal | J5 |
| 1 | C160404 qwiic | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J6 |
| 1 | In | TB00750812BE | J7 |
| 1 | Out | TB00750812BE | J8 |
| 1 | Misc | PinHeader_1x08_P2.54mm_Vertical | J9 |
| 1 | SW | AMASS_XT30U-F_1x02_P5.0mm_Vertical | J10 |
| 1 | pwr | CUI_TB007-508-02BE | J11 |
| 2 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J12, J13 |
| 1 | Buzzer | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | +5V | TestPoint_Keystone_5010-5014_Multipurpose | TP1+1 |
| 2 | GND | TestPoint_Keystone_5000-5004_Miniature | TP1_GND1, TP5 |
| 1 | +5V | TestPoint_Keystone_5000-5004_Miniature | TP2_5 |
| 1 | +3.3V | TestPoint_Keystone_5000-5004_Miniature | TP3_3_3 |
| 1 | Fire | TestPoint_Keystone_5010-5014_Multipurpose | TP4Fire1 |
| 1 | +12 | TestPoint_Keystone_5000-5004_Miniature | TP4_12 |
| 1 | LED Trig | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | C2286 PWR | LED_0603_1608Metric | D2 |
| 1 | B330A-13-F | D_SMA | D3 |
| 1 | LED Trig | LED_0805_2012Metric_Castellated | D4 |
| 1 | LED Focus | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | 1UF 1uf | CP_Elec_4x5.4 | C1 |
| 1 | 25UF 25uf | C_Elec_4x5.4 | C2 |
| 2 | C1525 0.01 μF | C_0402_1005Metric | C3, C4 |
| 2 | 750 | R_0603_1608Metric | R1, R13 |
| 7 | 1K | R_0603_1608Metric | R2, R3, R4, R5, R7, R14, R15 |
| 2 | 51 | R_0603_1608Metric | R6, R8 |
| 2 | 0 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9, R10 |
| 2 | 10K | R_0603_1608Metric | R11, R12 |
CameraTriggerSensorNodeOnly design files
The KiCad project lives in the chrocket/RocketTrig repository on GitHub; these links point at the commit this page was built from.
- LayoutRemoteLaunch_Controller/CameraTriggerRev 4_2 w Launch Controller 2023/CameraTriggerSensorNodeOnly.kicad_pcb
- SchematicRemoteLaunch_Controller/CameraTriggerRev 4_2 w Launch Controller 2023/CameraTriggerSensorNodeOnly.kicad_sch
- BOMRemoteLaunch_Controller/CameraTriggerRev 4_2 w Launch Controller 2023/production_out_20230704/JLCPCB BOM.xlsx
CameraTriggerSensorNodeOnly: common questions
How big is the CameraTriggerSensorNodeOnly PCB?
The CameraTriggerSensorNodeOnly measures 92.1 × 93.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CameraTriggerSensorNodeOnly?
55 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CameraTriggerSensorNodeOnly design files?
From the chrocket/RocketTrig repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CameraTriggerSensorNodeOnly design in my own project?
Yes, under the terms of its GPL-3.0 license, which chrocket chose for the repository.