Macroboard
Cib0rg·macroboard·hardware/pcb/elgato.kicad_pcb
About the Macroboard PCB
Macroboard is an open source PCB design by Cib0rg, published on GitHub. It is a 2-layer board measuring 172.4 × 128.4 mm, with 49 components from 10 distinct parts.
Other key parts include the 74HC138. By type, the board carries 25 capacitors, 11 diodes, 10 resistors, 2 ICs and 1 connector.
From the project
Программируемая макроклавиатура с открытым исходным кодом на базе ESP32-S3 — 10 кнопок с индивидуальными круглыми дисплеями, RGB подсветкой и настраиваемыми действиями.
Программируемая макроклавиатура с открытым исходным кодом на базе ESP32-S3 — 10 кнопок с индивидуальными круглыми дисплеями, RGB подсветкой и настраиваемыми действиями.
Устройство аналогично Elgato Stream Deck, но с открытым исходным кодом. Каждая кнопка имеет собственный круглый дисплей 160×160 для отображения иконок, RGB LED подсветку и программируемое действие. Отсутствует ограничение по входному напряжению, подключение зарядок с QC скорее всего сожжёт часть платы! Включать сначала питание от 2А блока (нижний разъём), потом уже подключать ESP через встроенные. Иначе есть небольшой шанс…
Main components on the Macroboard
Macroboard bill of materials (BOM)
49 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74HC138 | SOIC-16_3.9x9.9mm_P1.27mm | U1, U2 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_HRO_TYPE-C-31-M-17 | J11 |
| 10 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 1 | 1N4148W | D_SOD-123 | D11 |
| 1 | 470uF 10V | CP_Elec_8x10.5 | C1 |
| 24 | 100nF | C_0805_2012Metric | C4, C5, C6, C7, C8, C9, C10, C11 +16 |
| 2 | 5.1k 5% | R_0805_2012Metric | R1, R11 |
| 3 | 10k | R_0805_2012Metric | R2, R3, R4 |
| 4 | 100 | R_0805_2012Metric | R5, R6, R7, R12 |
| 1 | 330 | R_0805_2012Metric | R10 |
Macroboard design files
The KiCad project lives in the Cib0rg/macroboard repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/pcb/elgato.kicad_pcb
- Schematichardware/pcb/elgato.kicad_sch
Macroboard: common questions
How big is the Macroboard PCB?
The Macroboard measures 172.4 × 128.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Macroboard?
49 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Macroboard design files?
From the Cib0rg/macroboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Macroboard design in my own project?
The repository has no license, so all rights stay with Cib0rg. Use it as a reference, and ask the author before reusing the design.