150 open source boards using the 74HC138

Real designs built with the 74HC138, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

150 boardsClear filters|Most starred

How designs wire the 74HC138

Read from the KiCad layouts of 87 open source designs, one per repository: what each pin of the 74HC138 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 61 of 86 designs, most often 100 nF (then 1 µF).
GNDpin 8Connected to: GND 95%
VCCpin 16Connected to: 5V 95%
  • Decoupling capacitor on 71% · 100 nF (58), 1 µF (3), 22 nF (2)

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenDeck r3.1.2 by shanteacontrols, 65uino by AndersBNielsen, Lagom by mohoyt and TS65AVR by mohitg11.

The 74HC138 in open source designs

The gallery holds 150 open source boards using the 74HC138 from 89 GitHub repositories; a typical one measures about 125 × 99.1 mm and carries around 67 components.

76% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.

The most starred is OpenDeck r3.1.2 by shanteacontrols.

Microcontrollers on boards using the 74HC138

74HC138: common questions

Where can I find a 74HC138 reference design?

Each of the 150 boards on this page is a real design using the 74HC138. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HC138 VCC pin?

The VCC pin has a decoupling capacitor on 61 of 86 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 87 open source designs using the 74HC138.

What parts are used alongside the 74HC138?

The 74HC00, 74HC32, 74HC245, 74HC74 and 74HC02 appear in the most repositories here.

Which microcontrollers do boards using the 74HC138 use?

Most are built on AVR/Arduino (21), RP2040/RP2350 (5), STM32 (3) and ESP8266 (2).

How big is a typical board using the 74HC138?

The median is 125 × 99.1 mm, and 76% are two-layer designs.

What is the most popular open source board using the 74HC138?

By GitHub stars, OpenDeck r3.1.2 by shanteacontrols, with 956 stars.

Can I simulate one of these boards using the 74HC138 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part