Actuator drive
Ciprian-LocalPulse·EMP-Guardian·hardware/pcb/actuator_drive.kicad_pcb
About the Actuator drive PCB
Actuator drive is an open source PCB design by Ciprian-LocalPulse, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 45 mm, with 7 components from 6 distinct parts.
Other key parts include the TC4429. By type, the board carries 3 connectors, 2 transistors, 1 IC and 1 capacitor.
It belongs with the iot & wireless designs in this gallery.
From the project
Open-source firmware and hardware design for EMP detection and active shielding of critical electronics.
Author: Ciprian Ștefan Pleșca License: CERN-OHL-S v2 (see ../../LICENSE-HARDWARE)
Three PCB files, one per circuit schematic in hardware/schematics/, each with real component footprints placed on a board outline — not just a schematic-level BOM. No copper routing yet — that's a deliberately separate, not-yet-done step (see "Status" below).
- sensorconditioning.kicadpcb — 15 component footprints + 4 M3 mounting holes, 70×45mm outline. - actuatordrive.kicadpcb — 9 component footprints + 4 M3 mounting holes, 65×45mm outline. - powersupply.kicadpcb — 14 component footprints + 4 M3 mounting…
Main components on the Actuator drive
Actuator drive bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TC4429 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 2 | IRFZ44N | TO-220-3_Vertical | Q1, Q2 |
| 1 | FROM_MCU_CTRL | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | PROTECTED_LINE_IN | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | PROTECTED_LINE_OUT | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | 100nF | C_0805_2012Metric | C1 |
Actuator drive design files
The KiCad project lives in the Ciprian-LocalPulse/EMP-Guardian repository on GitHub; these links point at the commit this page was built from.
Actuator drive: common questions
How big is the Actuator drive PCB?
The Actuator drive measures 65 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Actuator drive?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Actuator drive design files?
From the Ciprian-LocalPulse/EMP-Guardian repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Actuator drive design in my own project?
Yes, under the terms of its MIT license, which Ciprian-LocalPulse chose for the repository.
More boards in EMP-Guardian
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547