Waveshare rpi2350-round-128-lcd piggyback

CircuitMonkey·waveshare-rpi2350-round-128-lcd-piggyback·pcb/waveshare-round-128-rpi2350-piggyback/waveshare-round-128-rpi2350-piggyback.kicad_pcb

Waveshare rpi2350-round-128-lcd piggyback PCB layout, top view — open source board by CircuitMonkey

About the Waveshare rpi2350-round-128-lcd piggyback PCB

Waveshare rpi2350-round-128-lcd piggyback is an open source PCB design by CircuitMonkey, published on GitHub under the MIT license. It is a 2-layer board measuring 36.5 × 32 mm, with 2 components from 1 distinct parts.

It belongs with the displays & leds designs in this gallery.

From the project

Piggyback hacking PCBs for the Waveshare RPi2350/2040 round 1.28 inch 240x240 LCD

Gain solder level access to the header pins on the back of this LCB module!

These are piggyback style GPIO access connector PCBs for the Waveshare 1.28 inch round LCD with RPi2350/2040 type controller. Amazon product link example: https://www.amazon.com/dp/B0DM1CB4YV

If you want to try one of these boards, simply upload the PCB KiCAD design to https://oshpark.com

Waveshare rpi2350-round-128-lcd piggyback, from the project README
From the project README

Waveshare rpi2350-round-128-lcd piggyback bill of materials (BOM)

2 components, 1 distinct parts.

QtyPartRefs
2
Conn_02x10_Odd_Even
J1, J2

Waveshare rpi2350-round-128-lcd piggyback design files

The KiCad project lives in the CircuitMonkey/waveshare-rpi2350-round-128-lcd-piggyback repository on GitHub; these links point at the commit this page was built from.

Waveshare rpi2350-round-128-lcd piggyback: common questions

How big is the Waveshare rpi2350-round-128-lcd piggyback PCB?

The Waveshare rpi2350-round-128-lcd piggyback measures 36.5 × 32 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Waveshare rpi2350-round-128-lcd piggyback?

2 components, from 1 distinct parts. The full bill of materials is listed on this page.

Where can I download the Waveshare rpi2350-round-128-lcd piggyback design files?

From the CircuitMonkey/waveshare-rpi2350-round-128-lcd-piggyback repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Waveshare rpi2350-round-128-lcd piggyback design in my own project?

Yes, under the terms of its MIT license, which CircuitMonkey chose for the repository.

Similar boards