Valpo-PCB-Ruler
About the Valpo-PCB-Ruler
Valpo-PCB-Ruler is an open source PCB design by clubrobot, published on GitHub under the MIT license. It is a 2-layer board measuring 203.2 × 38.1 mm, with 26 components from 26 distinct parts.
From the project
Repo de toutes les cartes électroniques utilisées par le CRINSA. Commencé en 2025 sous Kicad 8.0
Custom ruler / reference PCB for the Valparaiso University's College of Engineering.
Valpo-PCB-Ruler bill of materials (BOM)
26 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | 2.5x2 |
| 1 | Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm | Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm | 3.2x2.4 |
| 1 | Crystal_SMD_Qantek_QC5CB-2Pin_5x3.2mm | Crystal_SMD_Qantek_QC5CB-2Pin_5x3.2mm | 5x3.2 |
| 1 | R_0201_0603Metric | R_0201_0603Metric | 0201 |
| 1 | R_0402_1005Metric | R_0402_1005Metric | 0402 |
| 1 | R_0603_1608Metric | R_0603_1608Metric | 0603 |
| 1 | R_0805_2012Metric | R_0805_2012Metric | 0805 |
| 1 | R_1206_3216Metric | R_1206_3216Metric | 1206 |
| 1 | R_1210_3225Metric | R_1210_3225Metric | 1210 |
| 1 | R_2010_5025Metric | R_2010_5025Metric | 2010 |
| 1 | BGA-48_8.0x9.0mm_Layout6x8_P0.8mm | BGA-48_8.0x9.0mm_Layout6x8_P0.8mm | BGA 0.8mm |
| 1 | DIP-14_W7.62mm_SMDSocket_SmallPads | DIP-14_W7.62mm_SMDSocket_SmallPads | DIP 14 Pin |
| 1 | SW_DIP_SPSTx05_Slide_9.78x14.88mm_W8.61mm_P2.54mm | SW_DIP_SPSTx05_Slide_9.78x14.88mm_W8.61mm_P2.54mm | Dip Switch 5 |
| 1 | Crystal_SMD_HC49-SD_HandSoldering | Crystal_SMD_HC49-SD_HandSoldering | HC49 |
| 1 | LQFP-32_7x7mm_P0.8mm | LQFP-32_7x7mm_P0.8mm | QFP32 |
| 1 | LQFP-100_14x14mm_P0.5mm | LQFP-100_14x14mm_P0.5mm | QPF100 |
| 1 | D_SC-80 | D_SC-80 | SC80 |
| 1 | D_SOD-128 | D_SOD-128 | SOD 128 |
| 1 | D_SOD-323 | D_SOD-323 | SOD 323 |
| 1 | SOT-23 | SOT-23 | SOT23 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SOT-23-5 | SOT-23-5 | SOT23-5 |
| 1 | SOT-223 | SOT-223 | SOT223 |
| 1 | SOT-323_SC-70 | SOT-323_SC-70 | SOT323 |
| 1 | SOT-353_SC-70-5 | SOT-353_SC-70-5 | SOT353 |
| 1 | TO-252-2 | TO-252-2 | TO252 |
| 1 | TO-263-2 | TO-263-2 | TO263 |
Valpo-PCB-Ruler design files
The KiCad project lives in the clubrobot/Cartes-elec repository on GitHub; these links point at the commit this page was built from.
Valpo-PCB-Ruler: common questions
How big is the Valpo-PCB-Ruler?
The Valpo-PCB-Ruler measures 203.2 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Valpo-PCB-Ruler?
26 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Valpo-PCB-Ruler design files?
From the clubrobot/Cartes-elec repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Valpo-PCB-Ruler design in my own project?
Yes, under the terms of its MIT license, which clubrobot chose for the repository.
