Electronics
cocktailmixer·electronics·driverboard/driverboard.kicad_pcb
About the Electronics PCB
Electronics is an open source PCB design by cocktailmixer, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 57.4 × 55.1 mm, with 26 components from 22 distinct parts.
Other key parts include the NCV7240ADPR2G and 74LVC1G34. By type, the board carries 12 connectors, 5 resistors, 4 capacitors, 3 diodes and 2 ICs.
From the project
Custom electronics for the cocktailmixer bot
The controllerboard is an SPI bus master and passes data to the driverboards which are connected in series as an SPI bus daisy-chain. The end of the chain is automatically recognized by the hardware and the fault reporting data looped back to the master.
The driver chip used is the ON Semi NCV7240 which features fault reporting (overload and overtemperature protection, open load / short to ground and SPI frame error detection), internal output clamping diodes and a 3.3V / 5V compatible SPI interface.
Main components on the Electronics
Electronics bill of materials (BOM)
26 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCV7240ADPR2G | SOP65P600X175-24N | IC1 |
| 1 | 74LVC1G34 | SOT-23-5_HandSoldering | U1 |
| 1 | output-1 | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J1 |
| 1 | output-2 | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J2 |
| 1 | output-3 | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J3 |
| 1 | output-4 | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J4 |
| 1 | output-5 | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J5 |
| 1 | output-6 | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J6 |
| 1 | output-7 | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J7 |
| 1 | output-8 | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J8 |
| 1 | SPI input | IDC-Header_2x05_P2.54mm_Vertical | J9 |
| 1 | SPI output | IDC-Header_2x05_P2.54mm_Vertical | J10 |
| 1 | 12V input | Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J11 |
| 1 | 12V output | Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J12 |
| 1 | power | LED_0805_2012Metric_Castellated | D1 |
| 1 | control | LED_0805_2012Metric_Castellated | D2 |
| 1 | MBRA340 | D_SMA | D3 |
| 3 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3 |
| 1 | 10u | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C4 |
| 2 | 100 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2k0 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R4 |
| 1 | 560 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
Electronics design files
The KiCad project lives in the cocktailmixer/electronics repository on GitHub; these links point at the commit this page was built from.
Electronics: common questions
How big is the Electronics PCB?
The Electronics measures 57.4 × 55.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Electronics?
26 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Electronics design files?
From the cocktailmixer/electronics repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Electronics design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which cocktailmixer chose for the repository.