17 open source boards using the 74LVC1G34

Real designs built with the 74LVC1G34, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

17 boardsClear filters|Most starred

How designs wire the 74LVC1G34

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the 74LVC1G34 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 4 has a series resistor on 10 of 15 designs, most often 470 Ω (then 33 Ω).
  • The VCC pin has a decoupling capacitor on 8 of 15 designs, most often 100 nF (then 100 pF).
NCpin 1Connected to: Not connected 100%
GNDpin 3Connected to: GND 100%
Pin 4Connected to: Signal 100%
  • Series resistor on 67% · 470 Ω (4), 33 Ω (2), 210 Ω (1)
VCCpin 5Connected to: 3.3V 93%
  • Decoupling capacitor on 53% · 100 nF (6), 100 pF (5), 10 µF (2)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mobof by osrf, Steamvan by jmdaly, CO60 by jmdaly and Ym2610-pcb by dan-rodrigues.

The 74LVC1G34 in open source designs

The gallery holds 17 open source boards using the 74LVC1G34 from 15 GitHub repositories; a typical one measures about 133 × 93 mm and carries around 122 components.

71% are two-layer designs, the rest use four layers or more, and 59% carry an open source license.

The most starred is Mobof by osrf.

Microcontrollers on boards using the 74LVC1G34

74LVC1G34: common questions

Where can I find a 74LVC1G34 reference design?

Each of the 17 boards on this page is a real design using the 74LVC1G34. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 74LVC1G34 pin 4?

Pin 4 has a series resistor on 10 of 15 designs, most often 470 Ω (then 33 Ω). Counted from the KiCad layouts of 15 open source designs using the 74LVC1G34.

What decoupling capacitors do designs use on the 74LVC1G34 VCC pin?

The VCC pin has a decoupling capacitor on 8 of 15 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 15 open source designs using the 74LVC1G34.

What parts are used alongside the 74LVC1G34?

The TLV70233_SOT23-5, 74AHCT595, 74LVC1G123, 74LVC1G125 and LMR38020F appear in the most repositories here.

Which microcontrollers do boards using the 74LVC1G34 use?

Most are built on RP2040/RP2350 (4), STM32 (4), AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the 74LVC1G34?

The median is 133 × 93 mm, and 71% are two-layer designs.

What is the most popular open source board using the 74LVC1G34?

By GitHub stars, Mobof by osrf, with 207 stars.

Can I simulate one of these boards using the 74LVC1G34 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part