DTGC-a small-GPU-on an-FPGA-driven over-USB

CodeStuffed·DTGC-a-small-GPU-on-an-FPGA-driven-over-USB·08-pcb-board/pcb/backpack/tinygpu_backpack.kicad_pcb

DTGC-a small-GPU-on an-FPGA-driven over-USB PCB layout, top view — open source board by CodeStuffed

About the DTGC-a small-GPU-on an-FPGA-driven over-USB PCB

DTGC-a small-GPU-on an-FPGA-driven over-USB is an open source PCB design by CodeStuffed, published on GitHub. It is a 4-layer board measuring 54 × 25 mm, with 39 components from 21 distinct parts.

Other key parts include the FT2232HL-REEL, AP2114H-3.3TRG1 and 93LC56BT-I/SN. By type, the board carries 18 capacitors, 9 resistors, 3 ICs, 3 connectors, 2 diodes and 2 inductors.

From the project

DTGC is a graphics chip I am building on the Sipeed Tang Nano 20K FPGA board. A PC sends drawing commands over USB, the FPGA draws into memory, and the picture goes out over HDMI to a monitor.

DTGC is a graphics chip I am building on the Sipeed Tang Nano 20K FPGA board. A PC sends drawing commands over USB, the FPGA draws into memory, and the picture goes out over HDMI to a monitor.

Status: nothing has run on real hardware yet. Every result here comes from simulation (running the Verilog on a PC) or from the emulator (a Python copy of the GPU). "Passes simulation" never means "works on the board". Real results go in docs/test-log.md.

DTGC-a small-GPU-on an-FPGA-driven over-USB, from the project README
From the project README

Main components on the DTGC-a small-GPU-on an-FPGA-driven over-USB

DTGC-a small-GPU-on an-FPGA-driven over-USB bill of materials (BOM)

39 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
FT2232HL-REEL
FT2232HL
FTDI
U1
1
AP2114H-3.3TRG1
AP2114H-3.3
Diodes Incorporated
U2
1
93LC56BT-I/SN
93LC56B
Microchip
U3
1
X322512MSB4SI
12MHz
YXC
Y1
1
TYPE-C-31-M-12
USB_C
Korean Hroparts
J1
1
KH-2.54FH-1X20P-H8.5
to Tang J5
Kinghelm
J2
1
KH-2.54FH-1X20P-H8.5
to Tang J6
Kinghelm
J3
1
MF-NSMF050-2
500mA hold
Bourns
F1
1
C12333
PRTR5V0U2X
Nexperia
D1
1
C8598
Schottky 1A
Changjing
D2
2
BLM18KG601SN1D
600R@100MHz
Murata
FB1, FB2
11
CL05B104KO5NNNC
100nF
Samsung
C1, C2, C3, C4, C5, C6, C7, C8 +3
1
CL10A335KP8NNNC
3.3uF
Samsung
C11
2
CL21A106KAYNNNE
10uF
Samsung
C12, C13
2
CL05C270JB5NNNC
27pF
Samsung
C14, C15
2
CL10A475KO8NNNC
4.7uF
Samsung
C17, C18
1
0402WGF1202TCE
12k 1%
Uniroyal
R1
2
0402WGF5101TCE
5.1k 1%
Uniroyal
R2, R3
4
0402WGF1002TCE
10k
Uniroyal
R4, R5, R6, R8
1
0402WGF2201TCE
2.2k
Uniroyal
R7
Show 1 more
QtyPartRefs
1
0402WGF1001TCE
1k
Uniroyal
R9

DTGC-a small-GPU-on an-FPGA-driven over-USB design files

The KiCad project lives in the CodeStuffed/DTGC-a-small-GPU-on-an-FPGA-driven-over-USB repository on GitHub; these links point at the commit this page was built from.

DTGC-a small-GPU-on an-FPGA-driven over-USB: common questions

How big is the DTGC-a small-GPU-on an-FPGA-driven over-USB PCB?

The DTGC-a small-GPU-on an-FPGA-driven over-USB measures 54 × 25 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the DTGC-a small-GPU-on an-FPGA-driven over-USB?

39 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DTGC-a small-GPU-on an-FPGA-driven over-USB design files?

From the CodeStuffed/DTGC-a-small-GPU-on-an-FPGA-driven-over-USB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DTGC-a small-GPU-on an-FPGA-driven over-USB design in my own project?

The repository has no license, so all rights stay with CodeStuffed. Use it as a reference, and ask the author before reusing the design.