ModulinVCA
ConDarth·modulin·modulinVCA/modulinVCA.kicad_pcb
About the ModulinVCA PCB
ModulinVCA is an open source PCB design by ConDarth, published on GitHub. It is a 2-layer board measuring 76.2 × 50.8 mm, with 44 components from 21 distinct parts.
Other key parts include the TL074. By type, the board carries 26 resistors, 6 transistors, 4 capacitors, 1 IC and 1 connector.
From the project
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin. This project is mostly based on a design Martin Molin of Wintergatan. An
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin. This project is mostly based on a design Martin Molin of Wintergatan. An explanation of his design can be found here.
My goal in improving this design is to make it more accessible. His design uses 9 or so prebuilt modules meant for modular synthesizers, each of which costs in the range of 70$+ making the instrument quite expensive for a diy build. I took inspiration from the modular…
Main components on the ModulinVCA
ModulinVCA bill of materials (BOM)
44 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL074 | DIP-14_CNC | U1 |
| 6 | BC548 | TO-92_CNC | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | Screw_Terminal_01x08 | TerminalBlock_1x8_CNC | J1 |
| 2 | 1k | Potentiometer_Trim_CNC | RV1, RV6 |
| 2 | 100k | Potentiometer_Trim_CNC | RV2, RV5 |
| 2 | B100k | Potentiometer_PanelMount_CNC | RV3, RV4 |
| 4 | 10u | C_Axial_P5.00mm_CNC | C1, C2, C3, C4 |
| 2 | 220k | R_2.54mm_CNC | R1, R15 |
| 1 | 820 | R_2.54mm_CNC | R2 |
| 2 | 1k 1% | R_7.62mm_CNC | R3, R20 |
| 2 | 1k 1% | R_2.54mm_CNC | R4, R19 |
| 2 | 22k | R_10.16mm_CNC | R5, R17 |
| 2 | 10k | R_2.54mm_CNC_Alt | R6, R18 |
| 2 | 22k | R_5.08mm_CNC | R7, R13 |
| 2 | 22k | R_2.54mm_CNC | R8, R14 |
| 3 | 10k | R_10.16mm_CNC | R9, R25, R26 |
| 2 | 10k | R_2.54mm_CNC | R10, R22 |
| 2 | 680k | R_2.54mm_CNC | R11, R24 |
| 2 | 680k | R_5.08mm_CNC | R12, R23 |
| 1 | 820 | R_2.54mm_CNC_Alt | R16 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k | R_7.62mm_CNC | R21 |
ModulinVCA design files
The KiCad project lives in the ConDarth/modulin repository on GitHub; these links point at the commit this page was built from.
ModulinVCA: common questions
How big is the ModulinVCA PCB?
The ModulinVCA measures 76.2 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ModulinVCA?
44 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the ModulinVCA design files?
From the ConDarth/modulin repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ModulinVCA design in my own project?
The repository has no license, so all rights stay with ConDarth. Use it as a reference, and ask the author before reusing the design.
More boards in modulin
ModulinLFO
ConDarth
88.9 × 177.8 mm112 parts2LNo license0ModulinVCO
ConDarth
88.9 × 177.8 mm108 parts2LNo license0ModulinVCF
ConDarth
50.8 × 177.8 mm69 parts2LNo license0ModulinEnvelope
ConDarth
50.8 × 177.8 mm47 parts2LNo license0ModulinAmplifier
ConDarth
76.2 × 50.8 mm23 parts2LNo license0ModulinTest
ConDarth
74.9 × 62.2 mm23 parts2LNo license0ModulinControl
ConDarth
76.2 × 50.8 mm19 parts2LNo license0ModulinPowerSupply
ConDarth
25.4 × 177.8 mm18 parts2LNo license0