431 open source boards using the TL074
Real designs built with the TL074, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
VCO
nickajeglin
37 × 113.9 mm104 parts2LNo license208MegaAmp Board
theacodes
55.9 × 38.6 mm35 parts2LApache-2.0177RP2040/RP2350
Pico dco
polykit
100 × 165 mm148 parts2LNo license161Output
QuinnFreedman
38 × 100 mm124 parts2LNo license114Polykit X1 Monosynth
polykit
200 × 100 mm147 parts2LNo license89RP2040/RP2350
TiNRS - DuckTape
ThisIsNotRocketScience
60.3 × 106.5 mm255 parts2LMIT87Crossover
maqifrnswa
185.4 × 105.4 mm120 parts2LGPL-3.073STM32
Throwback Operator
AidanHockey5
80 × 57.2 mm54 parts2LNo license71ESP32
ESP32-Eurorack-Audio
ctag-fh-kiel
100 × 100 mm167 parts4LNo license70Zoxnoxious Z5524 (SSI2130/AS3394)
brer-rabbit
80 × 80 mm222 parts4LGPL-3.068Eurorack 4XVCA Module
Len42
50.5 × 108.2 mm108 parts2LNo license50Schraeg
barnabywalters
84.5 × 128.5 mm110 parts2LCC-BY-SA-4.043OpenEuroBoard
sensai7
300 × 100 mm135 parts2LGPL-3.041STM32
Oscar components
dchwebb
71 × 100 mm63 parts4LUnlicense41BioAmp v1.5
upsidedownlabs
32 × 60 mm28 parts2LCERN-OHL-S-2.041AVR/Arduino
OtterX
RetroRemake
170.1 × 170.1 mm168 parts4LCERN-OHL-W-2.040MAIN
aliqut
99.6 × 99.8 mm92 parts4LGPL-3.039MiniOSC v2.0 - Main
benjiaomodular
30 × 109.5 mm68 parts2LCC-BY-SA-4.036Multibus mainboard
coriolisinstruments
526 × 20 mm138 parts2LNo license33Drum H v2
Pl0p
100 × 100 mm96 parts2LNo license33258D
DunningtonAudio
104 × 158 mm219 parts2LGPL-3.031Voice board
Windfisch
83.8 × 72.4 mm127 parts2LGPL-3.031Amp
rabidaudio
59 × 110 mm111 parts2LMIT31AVR/Arduino
Polykit Kosmo Multitool
polykit
60 × 150 mm90 parts2LCC-BY-NC-4.031AVR/Arduino
Midi2cv
tomarus
81.3 × 96.5 mm63 parts2LNo license30Ilse
chairaudio
78.5 × 109.5 mm88 parts2LCC-BY-NC-4.029Kosmo spring reverb driver
polykit
50 × 200 mm42 parts2LNo license29- schematic only · 56 partsAVR/Arduino
GranulArduino
benjiaomodular
56 partsMIT29 MiniDJ Back
Thorinair
29.5 × 108.6 mm182 parts2LCC-BY-SA-4.025281D
DunningtonAudio
104 × 158 mm370 parts4LGPL-3.024Miasma Main smd
JMHanson4
99.1 × 99.1 mm169 parts2LNo license23AVR/Arduino
No fi delay
Krakenpine
99.5 × 199.5 mm80 parts2LNo license22STM32
Retrospector Components
dchwebb
60 × 110 mm131 parts2LNo license18STM32
Gliss main
BelaPlatform
19 × 111.1 mm94 parts4LNo license18VCF-3350-8
polykit
151.5 × 90.5 mm154 parts2LNo license17DaisyPodal
motekulo
76 × 82 mm56 parts2LNo license15
How designs wire the TL074
Read from the KiCad layouts of 224 open source designs, one per repository: what each pin of the TL074 connects to, and the resistors, capacitors and other passives placed on it.
- The - pins have a series resistor on 203 of 224 designs, most often 100 kΩ (then 10 kΩ).
- The VEE pin has a series resistor on 185 of 223 designs, most often 100 kΩ (then 1 kΩ).
- The Y0 pin has a series resistor on 168 of 224 designs, most often 100 kΩ (then 1 kΩ).
- The VSS pin has a series resistor on 153 of 223 designs, most often 100 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Y0pin 1 | Connected to: Signal 96% |
|
| -pin 2, 6, 9, 13 | Connected to: Signal 94% |
|
| +pin 3, 5, 10, 12 | Connected to: Signal 63% · GND 34% |
|
| V+pin 4 | Connected to: 12V 92% |
|
| VEEpin 7 | Connected to: Signal 97% |
|
| VSSpin 8 | Connected to: Signal 95% |
|
| V-pin 11 | Connected to: -12V 75% |
|
| X1pin 14 | Connected to: Signal 89% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Logiverter by nickajeglin, MegaAmp Board by theacodes, Pico dco by polykit and Output by QuinnFreedman.
The TL074 in open source designs
The gallery holds 431 open source boards using the TL074 from 240 GitHub repositories; a typical one measures about 68.6 × 100.9 mm and carries around 77 components.
87% are two-layer designs, the rest use four layers or more, and 34% carry an open source license.
The most starred is VCO by nickajeglin.
Parts used alongside the TL074
Microcontrollers on boards using the TL074
What boards using the TL074 are built for
TL074: common questions
Where can I find a TL074 reference design?
Each of the 431 boards on this page is a real design using the TL074. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TL074 - pin?
The - pins have a series resistor on 203 of 224 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 224 open source designs using the TL074.
What resistor goes on the TL074 VEE pin?
The VEE pin has a series resistor on 185 of 223 designs, most often 100 kΩ (then 1 kΩ). Counted from the KiCad layouts of 224 open source designs using the TL074.
What resistor goes on the TL074 Y0 pin?
The Y0 pin has a series resistor on 168 of 224 designs, most often 100 kΩ (then 1 kΩ). Counted from the KiCad layouts of 224 open source designs using the TL074.
What parts are used alongside the TL074?
The TL072, LM13700, L7805, MCP6004 and 40106 appear in the most repositories here.
Which microcontrollers do boards using the TL074 use?
Most are built on AVR/Arduino (22), STM32 (22), RP2040/RP2350 (14) and NXP (8).
How big is a typical board using the TL074?
The median is 68.6 × 100.9 mm, and 87% are two-layer designs.
What is the most popular open source board using the TL074?
By GitHub stars, VCO by nickajeglin, with 208 stars.
Can I simulate one of these boards using the TL074 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.