Melodica main
connormichalec·395-Melodica·PCBs/V1_OLD/Melodica_main/V2/melodica_main.kicad_pcb
About the Melodica main PCB
Melodica main is an open source STM32 PCB design by connormichalec, published on GitHub. It is a 2-layer board measuring 178.5 × 32.5 mm, with 35 components from 14 distinct parts.
Its main chip is the STM32F405RGTx, from the STM32 family. By type, the board carries 7 capacitors, 1 IC, 1 connector and 1 battery holder.
From the project
Electronic modular melodica with built in synthesis
Main components on the Melodica main
Melodica main bill of materials (BOM)
35 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGTx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | AudioJack3_SwitchTR | Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J1 |
| 11 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | 1k1, 1k2, 1k3, 1k4, 3.6k, 10k1, 10k2, 10k3 +3 |
| 1 | Battery | BatteryHolder_MPD_BC2AAPC_2xAA | BT1 |
| 1 | Conn_02x38_Odd_Even_Shielded | PinHeader_2x38_P2.54mm_Horizontal | Keys1 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Horizontal | MIDI1 |
| 3 | CD74HC4067M | SOIC-24W_7.5x15.4mm_P1.27mm | MUX1, MUX2, MUX3 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Horizontal | Master_Switch1, Misc_Power1 |
| 1 | Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Horizontal | Programmable_Inputs1 |
| 2 | Conn_01x04 | PinHeader_1x04_P2.54mm_Horizontal | Programmer1, Programmer2 |
| 2 | SW_Push | SW_PUSH_6mm_H4.3mm | Reset1, Reset2 |
| 1 | STM32L031K6Tx | LQFP-32_7x7mm_P0.8mm | STM32L031K6Tx1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Horizontal | UART1 |
| 7 | C | CP_Radial_D5.0mm_P2.00mm | C1, C2, C3, C4, C5, C6, C7 |
Melodica main design files
The KiCad project lives in the connormichalec/395-Melodica repository on GitHub; these links point at the commit this page was built from.
Melodica main: common questions
What microcontroller does the Melodica main use?
The Melodica main is built around the STM32F405RGTx, from the STM32 family.
How big is the Melodica main PCB?
The Melodica main measures 178.5 × 32.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Melodica main?
35 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Melodica main design files?
From the connormichalec/395-Melodica repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Melodica main design in my own project?
The repository has no license, so all rights stay with connormichalec. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Melodica main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in 395-Melodica
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k