Sense

CopperPilot·remake-xiao-esp32s3-sense-kicad·hardware/sense/sense.kicad_pcb

Sense PCB layout, top view — open source board by CopperPilot

About the Sense PCB

Sense is an open source PCB design by CopperPilot, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 17.8 × 15.4 mm, with 44 components from 17 distinct parts.

Other key parts include the TPS7A0228DQNR and BU12TD2WNVX-TL. By type, the board carries 17 capacitors, 13 resistors, 6 diodes, 2 ICs and 2 inductors.

From the project

Unofficial KiCad 10 remake of the XIAO ESP32S3 Sense: 4-layer ESP32-S3R8 base board + 4-layer Sense expansion daughterboard (OV3660 24P camera FPC, PDM MEMS microphone, microSD slot) mated via 30-pin Hirose DF40. Designed by AdityaNG and CopperPilot, open for review.

4-layer, 17.78 × 15.367 mm (1.0 mm FR-4, ENIG) expansion daughterboard designed in KiCad 10.0.3 (hardware/sense/sense.kicadpro) that mates onto the base board's J3 plug with a 3.0 mm` board-to-board stack height.

- 30-Pin Mezzanine Receptacle (JA3): Bottom-mounted Hirose DF40HC(3.0)-30DS-0.4V(51) (0.4 mm pitch, 3.0 mm mated stack height, LCSC C579862) receiving VIN, VCC3V3, GND, DVP camera signals, PDM audio signals, and SPI microSD signals from the base board. - 2.8 V Camera Analog/IO LDO (U1): SG Micro SGM2036-2.8YN5G/TR (X2SON-4, 1.0 × 1.0 mm, LCSC C428308) regulated from VIN (EN pulled…

Main components on the Sense

TPS7A0228DQNRBU12TD2WNVX-TL

Sense bill of materials (BOM)

44 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS7A0228DQNR
U1
1
BU12TD2WNVX-TL
U2
1
AFC01-S24FCC-00
JA1
1
TF-121-ARP8H30
JA2
1
DF40HC(3.0)-30DS-0.4V(51)
JA3
1
MSM261DGT003
MIC1
5
PESD5V0S1BL,315
D1, D2, D3, D4, D5
1
RB521S-30
D6
2
BLM15AG121SN1D
FB1, FB2
3
CL05A475MP5NRNC
4.7uF
C1, C2, C11
4
CL05A225MQ5NSNC
2.2uF
C3, C4, C13, C14
9
CL05B104KO5NNNC
100nF
C5, C6, C7, C8, C10, C12, C15, C16 +1
1
CL05A105KA5NQNC
1uF
C9
3
0402WGF220JTCE
22R
R1, R2, R3
5
0402WGF4701TCE
4.7kR
R4, R5, R6, R7, R8
2
0402WGF1002TCE
10kR
R9, R10
3
0402WGF0000TCE
0R
R12, R14, R16

Sense design files

The KiCad project lives in the CopperPilot/remake-xiao-esp32s3-sense-kicad repository on GitHub; these links point at the commit this page was built from.

Sense: common questions

How big is the Sense PCB?

The Sense measures 17.8 × 15.4 mm, has 4 copper layers and is 1 mm thick.

How many components are on the Sense?

44 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sense design files?

From the CopperPilot/remake-xiao-esp32s3-sense-kicad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Sense design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which CopperPilot chose for the repository.

More boards in remake-xiao-esp32s3-sense-kicad