Xiao esp32-s3-cam
CopperPilot·remake-xiao-esp32s3-sense-kicad·hardware/xiao-esp32-s3-cam.kicad_pcb
About the Xiao esp32-s3-cam PCB
Xiao esp32-s3-cam is an open source ESP32 PCB design by CopperPilot, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 17.8 × 21.1 mm, with 54 components from 30 distinct parts.
Its main chip is the ESP32-S3R8, from the ESP32 family. Other key parts include the TPS62840YBGR, BQ25101YFPR and BY25Q64ESHIG(R). By type, the board carries 24 capacitors, 12 resistors, 4 ICs, 4 inductors, 2 relays and 2 diodes.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
Unofficial KiCad 10 remake of the XIAO ESP32S3 Sense: 4-layer ESP32-S3R8 base board + 4-layer Sense expansion daughterboard (OV3660 24P camera FPC, PDM MEMS microphone, microSD slot) mated via 30-pin Hirose DF40. Designed by AdityaNG and CopperPilot, open for review.
4-layer, 17.78 × 21.135 mm (1.0 mm FR-4, ENIG) base board designed in KiCad 10.0.3 (hardware/xiao-esp32-s3-cam.kicadpro) and verified with rea-hardware`.
- SoC (U1): Espressif ESP32-S3R8 (QFN-56, 7.0 × 7.0 mm, LCSC C5118525) with dual-core Xtensa LX7 at 240 MHz, 8 MB internal Octal PSRAM (VDDSPI), USB 2.0 OTG/Serial-JTAG (GPIO19/GPIO20), 8-bit DVP camera interface, PDM microphone interface, SPI, and 2.4 GHz Wi-Fi / BLE 5.0 RF port. - External QSPI Flash (U5): BoyaMicro BY25Q64ESHIG(R) 64 Mbit (8 MB) 3.3 V QSPI NOR Flash (USON-8, 3.0 × 2.0 mm, LCSC C2960187) powered from VDDSPI with 100 nF…
Main components on the Xiao esp32-s3-cam
Xiao esp32-s3-cam bill of materials (BOM)
54 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3R8 | QFN56G-0.4-7X7MM | U1 |
| 1 | TPS62840YBGR | BGA6-0.35-0.745X10.95X0.4MM | U3 |
| 1 | BQ25101YFPR | WLCSP-0.4-0.92X1.16X0.4MM | U4 |
| 1 | BY25Q64ESHIG(R) | USON8-0.8-4X3MM | U5 |
| 1 | LP0404N3T5G | PMOS_1.0_0.6_0.35MM | Q1 |
| 1 | 7E040000C01 40MHz | X4-SMD-1.6X1.2X0.35MM | X1 |
| 1 | DF40C-30DP-0.4V(51) | BTB30-0.4-7.52X2.97X1.14 | J3 |
| 1 | U.FL-R-SMT-1(10) | U-FL3P-SMD-2.6X2.6X1.0MM | ANT1 |
| 2 | 1TS026A-1000-0550-CT | SW4-SMD-2.8-2.6X1.6X0.53MM | K1, K2 |
| 1 | TYPE-C 16PIN 2MD(073) TYPE-C-16P | USB2.0-TYPE-C | USB0 |
| 1 | 16-213SDRC/S530-A3/TR8 RED | LED-0402 | CHG0 |
| 1 | PSBD2FD30V01 | DFN1006-2L | D2 |
| 1 | 16-213UYOC/S530-A2/TR8 YELLOW | LED-0402 | D3 |
| 1 | SDCL0603Q2N0ST02 2nH | L0201 | L1 |
| 1 | SDCL0603Q3N3ST02 3.3nH | L0201 | L2 |
| 1 | SDFL1608LR47KTF 470nH | L0603 | L4 |
| 1 | LQP03TN24NH02D 24nH | L0201 | L5 |
| 4 | GRM033R61A225ME47D 2.2uF | C0201 | C3, C9, C13, C16 |
| 3 | CGA0201X5R475M6R3GT 4.7uF | C0201 | C4, C5, C6 |
| 3 | 0201CG100J500NT 10pF | C0201 | C7, C8, C28 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | GRM033R60J105KEA2D 1uF | C0201 | C10, C21, C25, C26 |
| 8 | CC0201KRX5R6BB104 100nF | C0201 | C11, C14, C15, C19, C22, C23, C29, C30 |
| 1 | CC0201KRX7R7BB103 10nF | C0201 | C12 |
| 1 | 0201CG1R0C500NT 1pF | C0201 | C18 |
| 2 | CR0201FH5101G 5.1kR | R0201 | R1, R2 |
| 2 | AC0201FR-0722RL 22R | R0201 | R3, R4 |
| 2 | RC0201FR-07499RL 499R | R0201 | R6, R15 |
| 3 | CR0201FH1002G 10kR | R0201 | R7, R8, R11 |
| 1 | RC0201FR-07100KL 100kR | R0201 | R9 |
| 2 | 0201WMF2203TEE 220kR | R0201 | R10, R13 |
Xiao esp32-s3-cam design files
The KiCad project lives in the CopperPilot/remake-xiao-esp32s3-sense-kicad repository on GitHub; these links point at the commit this page was built from.
Xiao esp32-s3-cam: common questions
What microcontroller does the Xiao esp32-s3-cam use?
The Xiao esp32-s3-cam is built around the ESP32-S3R8, from the ESP32 family.
How big is the Xiao esp32-s3-cam PCB?
The Xiao esp32-s3-cam measures 17.8 × 21.1 mm, has 4 copper layers and is 1 mm thick.
How many components are on the Xiao esp32-s3-cam?
54 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Xiao esp32-s3-cam design files?
From the CopperPilot/remake-xiao-esp32s3-sense-kicad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Xiao esp32-s3-cam design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which CopperPilot chose for the repository.
Can I test firmware for the Xiao esp32-s3-cam without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in remake-xiao-esp32s3-sense-kicad
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k