Hydroponics hw
CrispyPointer·hydroponics_hw·P01_Hydroponics/USB-Type C PD_sch.kicad_sch
About the Hydroponics hw PCB
Hydroponics hw is an open source PCB design by CrispyPointer, published on GitHub under the MIT license. It is a board, with 28 components from 17 distinct parts.
Other key parts include the AP33772S. By type, the board carries 13 resistors, 5 capacitors, 4 transistors, 3 diodes, 1 IC and 1 connector.
Main components on the Hydroponics hw
Hydroponics hw bill of materials (BOM)
28 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP33772S | QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U3 |
| 2 | DMN3008SFG | Diodes_PowerDI3333-8 | Q5, Q6 |
| 2 | BSS138 | SOT-23 | Q7, Q8 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J8 |
| 1 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | TH1 |
| 1 | TPD4E05U06DQA | USON-10_2.5x1.0mm_P0.5mm | D6 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7, D8 |
| 2 | 10uF/25VDC | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17, C19 |
| 1 | 1uF/10VDC | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18 |
| 2 | 0.1uF/10VDC | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20, C21 |
| 3 | 0R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21, R27 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R23 |
| 1 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | 5mR | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R25 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26 |
| 1 | 100R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R28 |
| 4 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29, R30, R31, R32 |
Hydroponics hw design files
The KiCad project lives in the CrispyPointer/hydroponics_hw repository on GitHub; these links point at the commit this page was built from.
Hydroponics hw: common questions
How many components are on the Hydroponics hw?
28 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hydroponics hw design files?
From the CrispyPointer/hydroponics_hw repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Hydroponics hw design in my own project?
Yes, under the terms of its MIT license, which CrispyPointer chose for the repository.