7 open source boards using the AP33772S
Real designs built with the AP33772S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RotoPD
CentyLab
24.4 × 35.8 mm41 parts2LCustom license175RP2040/RP2350
PicoPD Pro
CentyLab
20.5 × 50.8 mm61 parts4LNo license40ESP32
Paperflux
albanpetit
33.5 × 50 mm43 parts4LNo license16RP2040/RP2350
Hardware
seedhammer
205.3 × 78 mm172 parts4LUnlicense9USB-C PD bench supply - power board
GarryBGoode
170 × 74.5 mm237 parts4LNo license0ESP32
Ncv7240-driver
jussty
200 × 120 mm68 parts4LNo license0- schematic only · 28 parts
Hydroponics hw
CrispyPointer
28 partsMIT0
How designs wire the AP33772S
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the AP33772S connects to, and the resistors, capacitors and other passives placed on it.
- The V18 pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 1 µF).
- The OTP pin has a resistor to GND on 5 of 6 designs, most often 10 kΩ.
- The IFB pin has a capacitor to GND on 5 of 6 designs, most often 100 nF.
- The CC2 pin has a resistor to GND on 5 of 6 designs, most often 5.1 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ISENPpin 1 | Connected to: VBUS 67% · a signal 33% | — |
| NCpin 2, 7, 10, 11, 14, 21 | Connected to: Not connected 64% · GND 28% | — |
| GNDpin 3 | Connected to: GND 83% · a signal 17% | — |
| SDApin 4 | Connected to: Signal 83% · 3.3V 17% |
|
| SCLpin 5 | Connected to: Signal 83% · GND 17% |
|
| FLIPpin 6 | Connected to: Not connected 67% · GND 17% · a signal 17% | — |
| LEDpin 8 | Connected to: Signal 50% · not connected 33% · GND 17% |
|
| INTpin 9 | Connected to: Signal 67% · not connected 17% · GND 17% |
|
| V18pin 12 | Connected to: Signal 83% · GND 17% |
|
| OTPpin 13 | Connected to: Signal 83% · GND 17% |
|
| IFBpin 15 | Connected to: Signal 83% · GND 17% |
|
| CC2pin 16 | Connected to: A connector 83% |
|
| CC1pin 17 | Connected to: A connector 83% |
|
| DNpin 18 | Connected to: Not connected 67% · a signal 33% | — |
| DPpin 19 | Connected to: Not connected 83% · a signal 17% | — |
| V5Vpin 20 | Connected to: Signal 67% · 5V 33% |
|
| VOUTpin 22 | Connected to: Signal 83% · GND 17% |
|
| PWR_ENpin 23 | Connected to: AON7262E 33% · GND 17% |
|
| EPpin 25 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RotoPD by CentyLab, PicoPD Pro by CentyLab, Paperflux by albanpetit and Hardware by seedhammer.
The AP33772S in open source designs
The gallery holds 7 open source boards using the AP33772S from 7 GitHub repositories; a typical one measures about 101.8 × 62.7 mm and carries around 61 components.
83% use four copper layers or more, and 29% carry an open source license.
The most starred is RotoPD by CentyLab.
Parts used alongside the AP33772S
Microcontrollers on boards using the AP33772S
What boards using the AP33772S are built for
AP33772S: common questions
Where can I find a AP33772S reference design?
Each of the 7 boards on this page is a real design using the AP33772S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AP33772S V18 pin connected?
The V18 pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the AP33772S.
What resistor goes on the AP33772S OTP pin?
The OTP pin has a resistor to GND on 5 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the AP33772S.
How is the AP33772S IFB pin connected?
The IFB pin has a capacitor to GND on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the AP33772S.
Which microcontrollers do boards using the AP33772S use?
Most are built on ESP32 (2) and RP2040/RP2350 (2).
How big is a typical board using the AP33772S?
The median is 101.8 × 62.7 mm, and 17% are two-layer designs.
What is the most popular open source board using the AP33772S?
By GitHub stars, RotoPD by CentyLab, with 175 stars.
Can I simulate one of these boards using the AP33772S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.