IO NRF minimal
About the IO NRF minimal PCB
IO NRF minimal is an open source AVR/Arduino PCB design by crlab3, published on GitHub. It is a 2-layer board measuring 52 × 33 mm, with 26 components from 16 distinct parts.
Its main chip is the ATtiny84-20SS, from the AVR/Arduino family. Other key parts include the NRF24L01_SMD and AP7370-33WW-7. By type, the board carries 8 capacitors, 7 resistors, 3 ICs, 3 connectors, 2 diodes and 1 transistor.
From the project
Latest version of IONRF & ESP32 OBD platform.
Main components on the IO NRF minimal
IO NRF minimal bill of materials (BOM)
26 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NRF24L01_SMD | NRF24L01_SMD | U1 |
| 1 | AP7370-33WW-7 | SOT-23-5 | U2 |
| 1 | ATtiny84-20SS | SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | BC847B | SOT-23 | Q1 |
| 1 | 12V_IN | SORKAPOCS-3.5mm-2 | J1 |
| 1 | Programmer_Pins_SPI | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | XKC-Y2S-IN | Molex_SPOX_5267-04A_1x04_P2.50mm_Vertical | J3 |
| 1 | 100mA Polyfuse | Fuse_1210_3225Metric_Pad1.42x2.65mm_HandSolder | F1 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | DO-214AC | D_SMA | D1 |
| 1 | LED | LED_0603_1608Metric | D4 |
| 2 | 10uF | C_1210_3225Metric | C1, C2 |
| 1 | 4.7uF | C_0805_2012Metric | C3 |
| 4 | 100nF | C_0603_1608Metric | C4, C5, C7, C8 |
| 1 | 100uF | CP_Elec_5x5.3 | C6 |
| 7 | 1k | R_0805_2012Metric | R1, R2, R3, R8, R9, R10, R12 |
IO NRF minimal design files
The KiCad project lives in the crlab3/OBD_IONRF_ESP32 repository on GitHub; these links point at the commit this page was built from.
IO NRF minimal: common questions
What microcontroller does the IO NRF minimal use?
The IO NRF minimal is built around the ATtiny84-20SS, from the AVR/Arduino family.
How big is the IO NRF minimal PCB?
The IO NRF minimal measures 52 × 33 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IO NRF minimal?
26 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the IO NRF minimal design files?
From the crlab3/OBD_IONRF_ESP32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the IO NRF minimal design in my own project?
The repository has no license, so all rights stay with crlab3. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IO NRF minimal without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in OBD_IONRF_ESP32
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k