MOD INVERTER BASEV0
CUERT-dev·SUPERMOD_PE_DEV
About the MOD INVERTER BASEV0 PCB
MOD INVERTER BASEV0 is an open source PCB design by CUERT-dev, published on GitHub. It is a 2-layer board measuring 99.5 × 98.9 mm, with 56 components from 41 distinct parts.
Other key parts include the TL431DBZ and LM358. By type, the board carries 21 resistors, 12 capacitors, 9 connectors, 8 diodes, 2 ICs and 2 transistors.
Main components on the MOD INVERTER BASEV0
MOD INVERTER BASEV0 bill of materials (BOM)
56 components, 41 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL431DBZ | SOT-23 | U3 |
| 1 | LM358 | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | HGN036N08S AO3400A | SOT-23 | Q1 |
| 1 | IRF1407 | TO-220-3_Vertical | Q3 |
| 1 | CONN_02X18_ODD_EVEN Conn_02x18_Odd_Even | HALF_BRIDGE_MODULE_V0 | J1 |
| 1 | CONN_02X09_ODD_EVEN Conn_02x15_Odd_Even | IDC-Header_2x15_P2.54mm_Vertical | J2 |
| 1 | CONN_01X01_PIN Conn_02x18_Odd_Even | HALF_BRIDGE_MODULE_V0 | J3 |
| 1 | Conn_02x18_Odd_Even | HALF_BRIDGE_MODULE_V0 | J6 |
| 1 | 12V_IN | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J10 |
| 1 | Conn_02x09_Odd_Even | psu_card_6012V0 | J11 |
| 1 | Conn_01x05_Pin | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J12 |
| 1 | Conn_01x03_Pin | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J13 |
| 1 | Conn_01x02_Pin | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J14 |
| 1 | Jumper_2_Open | PinHeader_2x01_P2.54mm_Vertical | JP1 |
| 1 | 10k | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | SS310 LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | 24V LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | 24V 1N62xxA | D_DO-201AE_P15.24mm_Horizontal | D3 |
| 2 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4, D5 |
| 1 | SMBJ15CA | D_SMB | D6 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SMBJ5.0A | D_SMB | D7 |
| 1 | 1N5819WS | D_SOD-323 | D8 |
| 4 | 220uF | CP_Radial_D14.0mm_P7.50mm | C1, C4, C5, C6 |
| 1 | 1NF 470uF | CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | 470uF | CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | 10UF 470uF | CP_Radial_D8.0mm_P3.50mm | C7 |
| 1 | 1UF 100nF 50V | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | 47NF 100nF 50V | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 1 | 1nF | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | C10 |
| 2 | 100nF 50V | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C12 |
| 7 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R6, R8, R9, R11, R18, R21 |
| 1 | 10K 47K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 10K 2.2K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 10K 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 10K 4.7k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 100 470k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 100 470 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 4.7K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
| 2 | 100 4.7K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R14 |
| 4 | 470 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15, R16, R17, R20 |
| 1 | 20k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19 |
MOD INVERTER BASEV0 design files
The KiCad project lives in the CUERT-dev/SUPERMOD_PE_DEV repository on GitHub; these links point at the commit this page was built from.
MOD INVERTER BASEV0: common questions
How big is the MOD INVERTER BASEV0 PCB?
The MOD INVERTER BASEV0 measures 99.5 × 98.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MOD INVERTER BASEV0?
56 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MOD INVERTER BASEV0 design files?
From the CUERT-dev/SUPERMOD_PE_DEV repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MOD INVERTER BASEV0 design in my own project?
The repository has no license, so all rights stay with CUERT-dev. Use it as a reference, and ask the author before reusing the design.