PtConfig
custom-ds·ptConfig·ptConfig/ptConfig.kicad_pcb
About the PtConfig PCB
PtConfig is an open source PCB design by custom-ds, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 17.5 × 53.1 mm, with 13 components from 10 distinct parts.
Other key parts include the CH340X. By type, the board carries 4 connectors, 2 diodes, 2 capacitors, 2 resistors, 1 IC and 1 fuse.
From the project
A configuration cable for the ptFlex, ptSolar, and ptSolarHF trackers, capable of configuring and supplying power.

Main components on the PtConfig
PtConfig bill of materials (BOM)
13 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340X | MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | 732-5394 6 Pin Male Header | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | 732-5316 Programming | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J3 |
| 1 | 6 Pin Male Header | PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | 507-1794-1 Polyfuse | Fuse_1206_3216Metric | F1 |
| 1 | CKN9104 Reset Switch | SW_SPST_PTS647_Sx38 | SW1 |
| 2 | LTST-C171GKT Green | D_0805_2012Metric | D1, D2 |
| 2 | 10NF 10nF | C_0805_2012Metric | C1, C2 |
| 2 | 1k | R_0805_2012Metric | R1, R6 |
PtConfig design files
The KiCad project lives in the custom-ds/ptConfig repository on GitHub; these links point at the commit this page was built from.
PtConfig: common questions
How big is the PtConfig PCB?
The PtConfig measures 17.5 × 53.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PtConfig?
13 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PtConfig design files?
From the custom-ds/ptConfig repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PtConfig design in my own project?
Yes, under the terms of its GPL-3.0 license, which custom-ds chose for the repository.