S32t

cyao1234·s32t·hardware/tiny-stm.kicad_pcb

S32t PCB layout, top view — open source STM32 board by cyao1234

About the S32t PCB

S32t is an open source STM32 PCB design by cyao1234, published on GitHub. It is a 2-layer board measuring 41 × 25 mm, with 15 components from 7 distinct parts.

Its main chip is the STM32L073RBTX, from the STM32 family. Other key parts include the XC6206PXXXMR. By type, the board carries 7 capacitors, 3 resistors, 2 ICs, 2 switches and 1 connector.

From the project

Trying out the oshpark afterdark service, which is same price as jlc. Made this board with castellated holes mainly for artistic purposes.

Trying out the oshpark afterdark service, which is same price as jlc. Made this board with castellated holes mainly for artistic purposes.

The routing is done with more of an artistic aspect in mind

Features: - Boot button - reset button - Castellated holez - 3v3 ldo - usb onboard - crystalless usb - stm32l0

S32t, from the project README
From the project README

Main components on the S32t

S32t bill of materials (BOM)

15 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32L073RBTX
STM32L073RBTx
U1
1
XC6206PXXXMR
XC6206PxxxMR
U2
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J1
2
SW_Push
SW1, SW2
2
1UF
1uF
C1, C2
5
100NF
100nF
C3, C4, C5, C6, C7
3
5.1K
5.1k
R1, R2, R3

S32t design files

The KiCad project lives in the cyao1234/s32t repository on GitHub; these links point at the commit this page was built from.

S32t: common questions

What microcontroller does the S32t use?

The S32t is built around the STM32L073RBTX, from the STM32 family.

How big is the S32t PCB?

The S32t measures 41 × 25 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the S32t?

15 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the S32t design files?

From the cyao1234/s32t repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the S32t design in my own project?

The repository has no license, so all rights stay with cyao1234. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the S32t without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards