Fx3-logic analyzer board
About the Fx3-logic analyzer board
Fx3-logic analyzer board is an open source PCB design by cyrozap, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 96.5 × 67.3 mm, with 5 components from 3 distinct parts.
Other key parts include the 74LVC541APW. By type, the board carries 3 connectors and 2 ICs.
It belongs with the test & measurement designs in this gallery.
From the project
A simple PCB to make the Cypress Semiconductor EZ-USB FX3 SuperSpeed Explorer Kit (CYUSB3KIT-003) suitable for use as a 16-channel, 100 MSps logic analyzer.
This is a simple expansion board for the [Cypress FX3 SuperSpeed Explorer Kit (CYUSB3KIT-003)][kit] that turns it into a 16-channel, 100 MSps logic analyzer.
- 16 input channels. - 100 MSps maxumim sample rate. - Supports logic levels of 1V8 and higher. - 5V tolerant inputs. - Connector pinout compatible with the [Digilent Analog Discovery][analog-discovery] and the [Analog Devices ADALM2000][adalm2000]. - Cables can be purchased [here][cable], but the pin header has a standard 0.1 inch (2.54 mm) pitch, so any 0.1 inch pitch "dupont wire"/breadboard jumper wires will work. - Design suitable…
Main components on the Fx3-logic analyzer board
Fx3-logic analyzer board bill of materials (BOM)
5 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LVC541APW | TSSOP-20_4.4x6.5mm_P0.65mm | U1, U2 |
| 1 | Conn_02x15_Odd_Even | PinHeader_2x15_P2.54mm_Vertical | J1 |
| 2 | Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J2, J3 |
Fx3-logic analyzer board design files
The KiCad project lives in the cyrozap/fx3-logic-analyzer-board repository on GitHub; these links point at the commit this page was built from.
- LayoutFX3-LA.kicad_pcb
Fx3-logic analyzer board: common questions
How big is the Fx3-logic analyzer board?
The Fx3-logic analyzer board measures 96.5 × 67.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fx3-logic analyzer board?
5 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Fx3-logic analyzer board design files?
From the cyrozap/fx3-logic-analyzer-board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Fx3-logic analyzer board design in my own project?
Yes, under the terms of its CC0-1.0 license, which cyrozap chose for the repository.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
LevelShifter
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
StackLink
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
EleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528
EleLab v2 Bus150
150 × 50 mm37 parts2LGPL-3.0528
EleLab v2 PowerFeed
68 × 50 mm11 parts2LGPL-3.0528