Tutorial01
About the Tutorial01 PCB
Tutorial01 is an open source PCB design by D76X, published on GitHub. It is a 2-layer board measuring 42.5 × 32.5 mm, with 3 components from 3 distinct parts.
By type, the board carries 1 diode and 1 resistor.
From the project
KiCad Projects
KiCad 9: Design & assemble an ESP32 IoT 4-layer PCB loaded with goodies A Complete Guide Tech Explorations
Peter Dalmaris futureshocked : KLP-5e-ESP32-sensor-board
1. Copper zones for GND 2. Copper zones for power 3. Differential pairs 4. Clock and high-speed signals 5. Power traces 6. All other signals 7. Optimization
SS-52400-002 Stewart Connector USB Type-C Connector | USB 3.1 | 1 Port | Right Angle Receptacle | Shielded | 0.039 in (1.00mm) PCB Thickness
Tutorial01 bill of materials (BOM)
3 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 9 V | BatteryHolder_Keystone_103_1x20mm | Batterie1 |
| 1 | LED Rot 3 mm | LED_D3.0mm | D1 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Tutorial01 design files
The KiCad project lives in the D76X/KiCad repository on GitHub; these links point at the commit this page was built from.
Tutorial01: common questions
How big is the Tutorial01 PCB?
The Tutorial01 measures 42.5 × 32.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tutorial01?
3 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tutorial01 design files?
From the D76X/KiCad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tutorial01 design in my own project?
The repository has no license, so all rights stay with D76X. Use it as a reference, and ask the author before reusing the design.
