STM 32
DakshLohchab·STM_32_PCB_layout
About the STM 32 PCB
STM 32 is an open source STM32 PCB design by DakshLohchab, published on GitHub under the MIT license. It is a 2-layer board measuring 38.4 × 32.3 mm, with 28 components from 16 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.
From the project
The project files are located within the STM32PCBlayout` directory[cite: 1]. Here is a breakdown of the core files:
The project files are located within the STM32PCBlayout` directory[cite: 1]. Here is a breakdown of the core files:
STMboarddesign.kicadpro: The main KiCad project file[cite: 1]. Start here to open the project. STMboarddesign.kicadsch: The schematic file containing the logical connections of the STM32 and peripheral components[cite: 1]. STMboarddesign.kicadpcb: The physical PCB layout and routing file[cite: 1]. STMboarddesign.kicadprl: Project-local settings, including layer visibility and specific UI preferences[cite: 1]. 629105150521 (rev1).stp: A 3D STEP model representing the board or a…
Main components on the STM 32
STM 32 bill of materials (BOM)
28 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | 16 Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J1 |
| 3 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 5 | 100n | C_0402_1005Metric | C1, C2, C3, C4, C9 |
| 1 | 10u | C_0504_1310Metric_Pad0.83x1.28mm_HandSolder | C5 |
| 1 | 10n | C_0402_1005Metric | C6 |
| 2 | 1u | C_0402_1005Metric | C7, C8 |
| 2 | 10pf | C_0402_1005Metric | C10, C11 |
| 2 | 22u | C_0805_2012Metric | C12, C13 |
| 1 | 10k | R_0402_1005Metric | R1 |
| 4 | 1k5 | R_0402_1005Metric | R2, R3, R4, R5 |
STM 32 design files
The KiCad project lives in the DakshLohchab/STM_32_PCB_layout repository on GitHub; these links point at the commit this page was built from.
- LayoutSTM_board_design.kicad_pcb
- SchematicSTM_board_design.kicad_sch
STM 32: common questions
What microcontroller does the STM 32 use?
The STM 32 is built around the STM32F103C8T6, from the STM32 family.
How big is the STM 32 PCB?
The STM 32 measures 38.4 × 32.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM 32?
28 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM 32 design files?
From the DakshLohchab/STM_32_PCB_layout repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM 32 design in my own project?
Yes, under the terms of its MIT license, which DakshLohchab chose for the repository.
Can I test firmware for the STM 32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k