182 open source boards using the STM32F103C8T6
Real designs built with the STM32F103C8T6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Huvud
bondus
42 × 42 mm116 parts4LGPL-3.0373STM32
MMDVM HS Dual Hat
phl0
65 × 56 mm117 parts2LNo license216STM32
MMDVM HS Hat
mathisschmieder
65.1 × 30.2 mm79 parts4LNo license200STM32
Cheap
hardenedlinux
68 × 40 mm44 parts2LCC0-1.0170STM32
VNA
profdc9
100 × 85 mm178 parts2LNo license92STM32
STM32F1-Breakout-Board
pms67
41 × 36 mm25 parts2LMIT83STM32
Eleph
FeruzTopalov
36 × 100 mm55 parts2LGPL-3.024STM32
DS DB SMT
taozhengbo
66 × 58.4 mm107 parts2LNo license16STM32
Power board
open-dynamic-robot-initiative
65 × 35 mm55 parts2LBSD-2-Clause13STM32
JBclone soldering station
Minu-IU3IRR
65 × 100 mm52 parts2LNo license13- schematic only · 32 partsSTM32
Deeperc
deeperc
32 partsApache-2.012 STM32
STM60-Keyboard
yangdigi
285 × 94.6 mm172 parts2LNo license11STM32
Basic STM32 Bluepill
flamerten
43 × 34 mm28 parts2LNo license11STM32
RISKYREA1200
arkadiuszmakarenko
32.8 × 100 mm20 parts4LNo license11STM32
ED060SC4-Driver-Board-Hardware
Mael-Le-Garrec
71.3 × 44.5 mm73 parts4LNo license9STM32
Cjmcu2
aeracoop
57.8 × 57.2 mm62 parts2LGPL-3.09STM32
STM32alt
profdc9
26.7 × 76.2 mm27 parts2LNo license9STM32
Candash
miekush
100 × 80 mm90 parts2LCustom license7STM32
DragonBot
OPRobots
136.6 × 108.6 mm70 parts2LGPL-2.07STM32
HotPlate
Markuselectronics
89 × 38 mm69 parts4LNo license7STM32
Gem solder
arlenko
34 × 96 mm96 parts2LCERN-OHL-S-2.06STM32
Spiflash
florolf
35 × 22 mm42 parts2LCC-BY-SA-4.05STM32
Motherboard
Brickteam-RO
100 × 100 mm84 parts2LMIT4STM32
MMDVM HS Hat
VR2VYE
65.1 × 30.2 mm75 parts2LNo license4STM32
USB-DALI
even-notodd
71.3 × 25.4 mm43 parts2LCERN-OHL-W-2.04STM32
DeskMixer
RaduAndre
154.7 × 113.1 mm96 parts2LCC-BY-NC-4.03STM32
Zenith-Development-Board
zenitheesc
50 × 63 mm67 parts2LMIT3STM32
Line-Follower-Robot v2
minhle4397
78 × 60 mm42 parts2LNo license3STM32
BMS-Version-4
0hasant
100 × 100 mm238 parts2LNo license2ESP32
Nixie-Controller v2
DanielHeEGG
220 × 65 mm201 parts4LCC-BY-SA-4.02STM32
619-J Stepper
jawher-Mansour
42 × 42 mm63 parts4LNo license2STM32
STM32-Environmental-Sensor and-Datalogging-Board
Fred98246
40 × 58 mm58 parts4LMIT2STM32
Opy1
EvanDesR
33.2 × 31.4 mm29 parts2LNo license2STM32
Stm32 minimal dev
amrithHN
53.3 × 35.6 mm28 parts2LGPL-3.02STM32
Stm32-basic
maanika
38.5 × 33.5 mm24 parts2LNo license2STM32
PCB DRONE C8
ArduProject
102 × 49 mm140 parts4LMIT1
How designs wire the STM32F103C8T6
Read from the KiCad layouts of 154 open source designs, one per repository: what each pin of the STM32F103C8T6 connects to, and the resistors, capacitors and other passives placed on it.
- The PD0 pin has a crystal on 132 of 153 designs, most often 16 MHz (then 8 MHz).
- The VDD pins have a decoupling capacitor on 132 of 151 designs, most often 100 nF (then 10 µF).
- The PD0 pin has a capacitor to GND on 125 of 153 designs, most often 10 pF (then 20 pF).
- The NRST pin has a capacitor to GND on 124 of 152 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 90% |
|
| PC13pin 2 | Connected to: Not connected 68% · a signal 31% | — |
| PC14pin 3 | Connected to: Not connected 74% · a signal 25% | — |
| PC15pin 4 | Connected to: Not connected 79% · a signal 21% | — |
| PD0pin 5 | Connected to: Signal 90% |
|
| PD1pin 6 | Connected to: Signal 88% |
|
| NRSTpin 7 | Connected to: Signal 96% |
|
| VSSApin 8 | Connected to: GND 95% | — |
| VDDApin 9 | Connected to: 3.3V 92% |
|
| PB10pin 21 | Connected to: A connector 53% · not connected 28% |
|
| PB11pin 22 | Connected to: A connector 52% · not connected 32% |
|
| VSSpin 23, 35, 47 | Connected to: GND 95% | — |
| VDDpin 24, 36, 48 | Connected to: 3.3V 95% |
|
| PB12pin 25 | Connected to: Not connected 66% · a signal 33% | — |
| PB13pin 26 | Connected to: Not connected 64% · a signal 36% | — |
| PB14pin 27 | Connected to: Not connected 64% · a signal 36% | — |
| PB15pin 28 | Connected to: Not connected 64% · a signal 35% | — |
| PA8pin 29 | Connected to: Not connected 61% · a signal 39% | — |
| PA12pin 33 | Connected to: A connector 57% · not connected 16% |
|
| PA15pin 38 | Connected to: Not connected 78% · a signal 22% | — |
| PB3pin 39 | Connected to: Not connected 61% · a signal 38% | — |
| PB4pin 40 | Connected to: Not connected 64% · a signal 36% | — |
| PB5pin 41 | Connected to: Not connected 66% · a signal 34% | — |
| BOOT0pin 44 | Connected to: Signal 89% |
|
| PB9pin 46 | Connected to: Not connected 63% · a signal 37% | — |
19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Huvud by bondus, MMDVM HS Dual Hat by phl0, MMDVM HS Hat by mathisschmieder and Cheap pcb by hardenedlinux.
The STM32F103C8T6 in open source designs
The gallery holds 182 open source boards using the STM32F103C8T6 from 164 GitHub repositories; a typical one measures about 53.1 × 45.8 mm and carries around 45 components.
77% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Huvud by bondus.
Parts used alongside the STM32F103C8T6
Microcontrollers on boards using the STM32F103C8T6
What boards using the STM32F103C8T6 are built for
STM32F103C8T6: common questions
Where can I find a STM32F103C8T6 reference design?
Each of the 182 boards on this page is a real design using the STM32F103C8T6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F103C8T6 PD0 pin connected?
The PD0 pin has a crystal on 132 of 153 designs, most often 16 MHz (then 8 MHz). Counted from the KiCad layouts of 154 open source designs using the STM32F103C8T6.
What decoupling capacitors do designs use on the STM32F103C8T6 VDD pin?
The VDD pins have a decoupling capacitor on 132 of 151 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 154 open source designs using the STM32F103C8T6.
How is the STM32F103C8T6 NRST pin connected?
The NRST pin has a capacitor to GND on 124 of 152 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 154 open source designs using the STM32F103C8T6.
What parts are used alongside the STM32F103C8T6?
The AMS1117-3.3, USBLC6-2SC6, SN65HVD230, 74HC595 and ADF7021 appear in the most repositories here.
Which microcontrollers do boards using the STM32F103C8T6 use?
Most are built on STM32 (174), ESP32 (7) and RP2040/RP2350 (1).
How big is a typical board using the STM32F103C8T6?
The median is 53.1 × 45.8 mm, and 77% are two-layer designs.
What is the most popular open source board using the STM32F103C8T6?
By GitHub stars, Huvud by bondus, with 373 stars.
Can I simulate one of these boards using the STM32F103C8T6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.