Ee usb switch
danderson·ee-usb-switch
About the Ee usb switch PCB
Ee usb switch is an open source STM32 PCB design by danderson, published on GitHub under the Custom license license. It is a 2-layer board measuring 52.5 × 55 mm, with 68 components from 17 distinct parts.
Its main chip is the STM32F042K6T6, from the STM32 family. Other key parts include the AP2120N and Si1869DH. By type, the board carries 26 capacitors, 21 resistors, 8 ICs, 6 connectors, 2 switches and 2 test points.
From the project
USB-controlled load switches
Main components on the Ee usb switch
Ee usb switch bill of materials (BOM)
68 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2120N | AP2120N_SOT23-3 | U1 |
| 1 | STM32F042K6T6 | STM32F042K6T6_32-QFP | U2 |
| 6 | Si1869DH | Si1869DH_SC70-6 | U3, U4, U5, U6, U7, U8 |
| 6 | 2_Post_Terminal | 2_Post_Terminal_OSTTE020104 | CON1, CON2, CON3, CON4, CON5, CON6 |
| 1 | 2A | Fuse_Block | F1 |
| 1 | 2_Post_Terminal | 2_Post_Terminal_OSTTE020104 | LINE1 |
| 2 | Switch_SPST | Switch_SPST_TL3301NF160QG | S1, S2 |
| 1 | SWD | Test_Point_Test_Point_1mm | TP1 |
| 1 | SWC | Test_Point_Test_Point_1mm | TP2 |
| 1 | USB | USB_Micro_SMD_RA | USB1 |
| 4 | 100nF | Capacitor_0603 | C1, C2, C3, C6 |
| 13 | 1µF | Capacitor_0603 | C4, C9, C11, C12, C14, C15, C17, C18 +5 |
| 7 | 10µF | Capacitor_0603 | C5, C10, C13, C16, C19, C22, C25 |
| 2 | 47pF | Capacitor_0603 | C7, C8 |
| 13 | 10k | Resistor_0603 | R1, R4, R5, R7, R8, R10, R11, R13 +5 |
| 2 | 22R | Resistor_0603 | R2, R3 |
| 6 | 2k | Resistor_0603 | R6, R9, R12, R15, R18, R21 |
Ee usb switch design files
The KiCad project lives in the danderson/ee-usb-switch repository on GitHub; these links point at the commit this page was built from.
- Layoutusb_switch.kicad_pcb
Ee usb switch: common questions
What microcontroller does the Ee usb switch use?
The Ee usb switch is built around the STM32F042K6T6, from the STM32 family.
How big is the Ee usb switch PCB?
The Ee usb switch measures 52.5 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ee usb switch?
68 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ee usb switch design files?
From the danderson/ee-usb-switch repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Ee usb switch design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Ee usb switch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k