6 open source boards using the STM32F042K6T6
Real designs built with the STM32F042K6T6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Miata ecu daughter
v3ai
125 × 60 mm226 parts4LMIT0STM32
Ee usb switch
danderson
52.5 × 55 mm68 parts2LCustom license0STM32
MiniEasy
Daniel-Alencar
66 × 26 mm53 parts2LNo license0STM32
Turnsignals
emb3rcia
31.6 × 34.2 mm22 parts2LNo license0STM32
Okgo2usbcontrol
cuspaceflight
40 × 25 mm22 parts2LNo license3STM32
Single button rectangular optical USB mouse
CopperPilot
52 × 86 mm51 parts2LCERN-OHL-S-2.00
How designs wire the STM32F042K6T6
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32F042K6T6 connects to, and the resistors, capacitors and other passives placed on it.
- The PB8-BOOT0 pin has a resistor to GND on 6 of 6 designs, most often 10 kΩ.
- The VDD pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
- The PF0-OSC_IN pin is left unconnected on 6 of 6 designs.
- The PF1-OSC_OUT pin is left unconnected on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 100% |
|
| PF0-OSC_INpin 2 | Connected to: Not connected 100% | — |
| PF1-OSC_OUTpin 3 | Connected to: Not connected 100% | — |
| NRSTpin 4 | Connected to: A connector 50% |
|
| VDDApin 5 | Connected to: 3.3V 83% · a signal 17% |
|
| PA0pin 6 | Connected to: Signal 83% · not connected 17% |
|
| PA1pin 7 | Connected to: Signal 67% · not connected 33% |
|
| PA2pin 8 | Connected to: Not connected 50% · a signal 50% |
|
| PA4pin 10 | Connected to: Not connected 67% · a signal 33% | — |
| PA5pin 11 | Connected to: Not connected 67% · a signal 33% | — |
| PA7pin 13 | Connected to: Signal 67% · not connected 33% |
|
| PB0pin 14 | Connected to: Not connected 50% · a signal 50% |
|
| PB1pin 15 | Connected to: Not connected 67% · a signal 33% | — |
| VSS_1pin 16 | Connected to: GND 100% | — |
| VDDIO2pin 17 | Connected to: 3.3V 100% |
|
| PA8pin 18 | Connected to: Not connected 83% · a signal 17% | — |
| PA9pin 19 | Connected to: Not connected 67% · a signal 33% | — |
| PA10pin 20 | Connected to: Not connected 67% · a signal 33% | — |
| PA15pin 25 | Connected to: Not connected 67% · a signal 33% | — |
| PB3pin 26 | Connected to: Not connected 83% · a signal 17% | — |
| PB4pin 27 | Connected to: Not connected 83% · a signal 17% | — |
| PB5pin 28 | Connected to: Not connected 83% · a signal 17% | — |
| PB6pin 29 | Connected to: Not connected 83% · a signal 17% | — |
| PB7pin 30 | Connected to: Not connected 67% · a signal 33% | — |
| PB8-BOOT0pin 31 | Connected to: Signal 100% |
|
| VSS_2pin 32 | Connected to: GND 100% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Okgo2usbcontrol by cuspaceflight, Single button rectangular optical USB mouse by CopperPilot, Ee usb switch by danderson and MiniEasy by Daniel-Alencar.
The STM32F042K6T6 in open source designs
The gallery holds 6 open source boards using the STM32F042K6T6 from 6 GitHub repositories; a typical one measures about 52.3 × 44.6 mm and carries around 52 components.
83% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Okgo2usbcontrol by cuspaceflight.
Microcontrollers on boards using the STM32F042K6T6
What boards using the STM32F042K6T6 are built for
STM32F042K6T6: common questions
Where can I find a STM32F042K6T6 reference design?
Each of the 6 boards on this page is a real design using the STM32F042K6T6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the STM32F042K6T6 PB8-BOOT0 pin?
The PB8-BOOT0 pin has a resistor to GND on 6 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the STM32F042K6T6.
What decoupling capacitors do designs use on the STM32F042K6T6 VDD pin?
The VDD pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32F042K6T6.
How is the STM32F042K6T6 PF0-OSC_IN pin connected?
The PF0-OSC_IN pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the STM32F042K6T6.
Which microcontrollers do boards using the STM32F042K6T6 use?
Most are built on STM32 (6).
How big is a typical board using the STM32F042K6T6?
The median is 52.3 × 44.6 mm, and 83% are two-layer designs.
What is the most popular open source board using the STM32F042K6T6?
By GitHub stars, Okgo2usbcontrol by cuspaceflight, with 3 stars.
Can I simulate one of these boards using the STM32F042K6T6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.