Modul Main Board
About the Modul Main Board
Modul Main Board is an open source NXP PCB design by danielDanielq, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 80 × 100 mm, with 29 components from 17 distinct parts.
Its main chip is the TEENSY 4.0, from the NXP family. By type, the board carries 14 connectors, 10 resistors, 2 ICs, 2 capacitors and 1 diode.
Main components on the Modul Main Board
Modul Main Board bill of materials (BOM)
29 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TEENSY 4.0 TEENSY_4.0 | TEENSY40_1 | IC1 |
| 1 | ~ | XL6009 | U1 |
| 1 | Pixy Cam1 | IDC-Header_2x04_P2.54mm_Vertical | J1 |
| 1 | Pixy Cam2 | IDC-Header_2x04_P2.54mm_Vertical | J2 |
| 3 | HC-SR04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4, J5, J6 |
| 1 | Servo | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | ESC | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |
| 1 | ESP8266 | PinSocket_1x04_P2.54mm_Vertical | J9 |
| 1 | LcdModule | IDC-Header_2x04_P2.54mm_Vertical | J10 |
| 1 | KF301-2P Screw Conn1 | KF3012P | J12 |
| 1 | On/Off Switch | PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | XT60-M | AMASS_XT60-M | J14 |
| 2 | Exposed Pins | PinHeader_1x14_P2.54mm_Vertical | J15, J16 |
| 1 | LED | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | D1 |
| 2 | ~ | CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 9 | 2K | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 1 | 220 | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R10 |
Modul Main Board design files
The KiCad project lives in the danielDanielq/NXP-Cup-Portfolio repository on GitHub; these links point at the commit this page was built from.
Modul Main Board: common questions
What microcontroller does the Modul Main Board use?
The Modul Main Board is built around the TEENSY 4.0, from the NXP family.
How big is the Modul Main Board?
The Modul Main Board measures 80 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Modul Main Board?
29 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Modul Main Board design files?
From the danielDanielq/NXP-Cup-Portfolio repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Modul Main Board design in my own project?
Yes, under the terms of its Apache-2.0 license, which danielDanielq chose for the repository.
Can I test firmware for the Modul Main Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in NXP-Cup-Portfolio
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL64
MicroCoreLabs
39.3 × 61.8 mm9 parts4LNo license532
NXPROM Emulator
21.5 × 37.1 mm5 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532
NXPXTMAX
81 × 46 mm14 parts4LNo license532